Looking for some feedback from people much smarter than me about this kind of stuff. :nerd_face: Outdoor ride yesterday shows quite a difference between some of the power metrics using Wahoo Bolt and after it’s loaded into TR: Wahoo showing metrics (note especially average power and KJ): [image] …

Do you have the same FTP set in both apps?

Doh!!! I do now. :crazy_face: (delete this post or keep it for future searches?)

Looks to me like the Wahoo data is off, 1128kJ would mean you need to ride 1h50min@171W. Take a look at my post about a similar issue here: [image] Why does average power calculate differently between services? Equipment Hi Im discussing this issue with Wahoo support mys…

FTP setting would affect TSS and IF but not average power and kilojoules. Assuming your only recording your ride on the bolt and then uploading to TR they should have the same power data. If that’s the case, then the difference is not in the power data but how it is being analyzed and interpreted.…

I have the include zeroes set to off: [image] I’m not clear on whether it should be on or off. I have the FTP set the same now, so I’ll keep an eye on it to see if the discrepancies continue. Thanks for the replies.

Power metrics: Wahoo vs. TR

Training

mcneese.chad February 22, 2020, 5:09pm 7

Power should include zeros.

Cadence should not include zeros.

Topic		Replies	Views
Why does average power calculate differently between services? Equipment	40	9310	June 4, 2021
Assioma Duo + Wahoo Bolt = Low kj readings Equipment power-meter	17	6036	August 18, 2021
Wahoo Elemnt Kj not matching up with TrainerRoad TrainerRoad Software	22	4402	April 1, 2023
Lap power not matching Wahoo BOLT	3	683	August 16, 2019
KJ Calculations on Various Platforms Training	21	1726	March 9, 2021

Power metrics: Wahoo vs. TR

Related topics