Sram Rival front break rubing

Equipment
1

I have a Crux with the stock SRAM Rival on it. On the stand, the front brake works fine. But when I am leaning in the slightest (think taking a corner), it causes the brake to rub. I have pushed and cleaned the pads and pistons. I have also checked the spoke tension on the wheel. I don’t think it is the caliper, since I’ve put a different wheel on and don’t have the problem. But the other wheel does have a Shimano rotor, so that may be affecting my results.

What else could it be?

2

It’s my understanding that the shimano rotors are thinner than your sram ones. You could try putting the shimano rotor on your problem wheel and see if it makes a difference.