Tacx Flow Smart Adaptor for a Cannondale CAAD13 => HELLLLPPPP

Equipment
1

Hi Everyone,

I have a Cannondale CAAD13 Disc 105 (link here : https://www.cannondale.com/en-us/bikes/road/race/caad13/caad13-disc-105).

I also got a Tacx Flow Smart Home Trainer.

I bought the AXE TACX E-THRU 12X142MM - M12X1 T1707 to fit but it doesn’t because the diameter of the E-THRU is too big for the bike.

Do you any idea which is the right axle to have ? Please provide me a link that i could ended up with that nightmare :slight_smile:

Thanks a lot for your help,

Best regards,

2

If you haven’t checked, remove the rear axle from the bike and see if there are marks indicating the thread size. Some (not all) will have that info on there for you to review.

3

Hi David,

Yes it days 142x m12 which is the size of the e thrux axle That i bought…

4

From a quick search, this seems to indicate you may have the right axle:

image
image1107Ă—228 12.4 KB

Interesting to see the note on the bottom, is apparently just for the SystemSix, but maybe worth a double check via a Cannondale dealer?

6

I don’t know if the CAAD13 is the same as the SuperSix Evo 2020, but on the Evo, it’s a double lead thread.
You just need to contact Garmin/Tacx and ask them for the double lead adapter. They will ship it to you :slight_smile: