This might be of interest to some of the users on here. It will be interesting to see how they stack up against the SRM version. [image] New Garmin Rally power meter pedal family to include SPD-SL and SPD models -... New range will include single- and dual-sided options throughout, too. …

First time at BWR AZ on March 5 2023: [image] 47%/53% left/right, clearly right side biased at the end, however REI installed the pedals. First use. Next ride on my bike March 13, 2023: [image] 41/59 holy right side bias!!! Enough to make me think my total power was slightly inflated. But not…

Also FWIW: [image] notice how the left/right balance goes whacky after 5 hours. The first 5 hours are - visually - around ~200W, and then your power drops over roughly ~1 hour and hour balance goes from 50/50 to left biased.

Hi- Wondering if you got the seated/standing time issue sorted out? I am going around in circles trying to resolve (device reset, pair/unpair/re-pair, etc.). Edge 840 + XC200 + latest firmware. It’s either zeros or null for both 9/10 rides. Occasionally random numbers. Garmin tells me it’s a persona…

Sounds like Garmin wants to shirk responsibility. Even if it is a “personal problem”, it is theirs to figure out.

I’d agree with Oreo, that it sounds like you’ve got a non-awesome person on the other end of support (pretty rare for the Vector/Rally support folks, who are actually usually the opposite end of that spectrum). In any event, for funsies, try pairing up your XC200 with some other power recording app…

Hey Harris, I had forgotten about this. I am looking at my recent outdoor rides and it looks like it is capturing standing / seated time on my Edge 1040. I have found one case during an indoor ride recorded on my Enduro2 where it seemed to capture nothing until the last 30mins of the ride. I am loo…

If it makes you feel better, I’m having issues (not this specific one) with my pedals too. My numbers are higher on my XC rally pedals AND my trainer by 20% but I can’t do the same ride over 2 sets of pedals and a smart trainer to prove it lol. I’ve sent them screenshots of my (garmin) HRM though a…

Interesting info. I am putting together some data with the DC Rainmaker Analyzer. Across two sets of Rally XC2 Pedals, I (so far) show my KICKR Bike reading higher power than the Rally XC Pedals. The pedals are usually around 5% lower. I need more data to really get a read on this. I always torque t…

I am seeing a pretty consistent difference between what my Rally Pedals are reporting (using them with TR PowerMatch on KICKER Bike) and what the KICKR Bike tells Zwift it’s actually doing. Thus far it’s around 5% on average but in many cases it’s a stable 9-10 watts throughout the ride regardless o…

The Kickr bike should be slightly below your pedals by 1 - 3% due to drive train losses. The Kickr being that much higher says one of them is not reading accurately. Have you looked at the left / right balance from the pedals? Is it close? Or is there a big discrepancy?

Garmin Rally Power Meter Pedals: Look Road, Shimano Road & MTB

Equipment

KevinKlaes December 5, 2025, 1:54am 484

I replaced two sets of bodies this year and it was really easy. Availability at the moment is poor and I expect it to only get worse with the new release.

Topic		Replies	Views
Garmin Rally XC200 Equipment	37	3203	June 13, 2024
Garmin Rally power meter pedals calibration Equipment	5	2904	July 29, 2022
Resolved: Unbelievability strong Equipment	20	2163	August 8, 2022
Major difference in power between Wahoo Kickr and Garmin Vectors - please help! Equipment trainer , power-meter	66	23022	February 13, 2021
Swapping power pedals between bikes Equipment	47	1478	October 3, 2025

Garmin Rally Power Meter Pedals: Look Road, Shimano Road & MTB

Related topics