Are there people who use, or have experiences with the Elite Nero Rollers? I’m want to replace my Tacx Bushido with something which is more convenient to use different bikes on. I swap regularly from my trackbike, to road bike or the bike of my wife. On a sidenote, how important is it to use a tr…

[image] Bestevaer: On a sidenote, how important is it to use a trainer tire on rollers? IMHO, not very important at all. I just make sure that I clean my tires with rubbing alcohol and a rag before putting it on the rollers. The pressure from rollers (via the 2 drums on the rear in particul…

There are a few comments in this Quick Motion thread on the Nero: [image] Upgrading my rollers...Elite Quick Motion rollers? Equipment Thanks for the update Killroyt23. Here has been my experience on the Nero’s in the first few days: I received my Elite Nero Interactive…

I’ve never used different tires on rollers and I used to ride rollers quite a bit in the winter. My thoughts on the Nero’s are in that other thread, but I truly do not see them as a valid option, and I’ve used and loved Kreitlers for years, have had both Wahoo’s (Kickr, Kickr Core), Bushido (long a…

Sorry to resurrect this thread. I just got the Nero’s and find that at “no resistance” I have issues comfortably staying balanced at low power. At the no resistance setting, my wheel speed drops to around 10MPH at ~130W (16MPH at ~230W). I’ve never ridden rollers before these, so I’m not really fa…

Anytime youre on rollers, slower speeds are more difficult to maintain balance. I have been looking at the Nero’s, but dont own them. With the increase in resistance, slower wheel speeds on the Neros may be easier, but I cant say for sure. The inertia of the wheels spinning makes things more stab…

One option to try in the recovers, is to use a taller gear with a lower cadence. This will get your wheel speed a bit higher and likely add to stability. Do keep in mind the need to spin out the legs though, and you may need to experiment to find a happy medium from the real recovery needs and kee…

Not sure what the problem is. I have gone down to 8 mphs at below 120W without resistence in low gear, but it is tricky for balance purposes. With resistance on up hill ascent much easier but then wattage gets in the 190 to 225 at low speeds. I noted that Elite did a Nero firmware upgrade to 192 …

Actually, it sounds like you are getting similar resistance / speed correlation to me. It’s gotten easier over the past week or two as I become accustomed to rollers, but at first I was worried that I wouldn’t be able to use this device effectively since I couldn’t hit the recovery valleys without l…

to clarify: I don’t have a power meter on my bike. If I get the Nero, does it calculate power output regardless of whether you have a power meter? I’m fine if it’s not super accurate, as long as it’s consistent

I just picked up a Nero, which was not easy to find. The first two vendors found their suppliers were out of stock (same supplier for both, perhaps?) and due to COVID19 and shipping, they could not confirm when they might have one in stock. I found a third company, which ordinarily I wouldn’t purcha…

Experiences with the Elite Nero Rollers

Equipment

Hamilton237 August 16, 2019, 2:48pm 3

There are a few comments in this Quick Motion thread on the Nero:

Topic		Replies	Views
Elite Nero - Assioma pedals - TR - finally well tuned Equipment trainer , power-meter	22	1902	March 24, 2025
Dumb rollers to Elite Nero - upgrade? Equipment trainer	2	879	November 18, 2021
Recommendation for good quality rollers Equipment trainer	71	7194	November 23, 2023
Upgrading my rollers...Elite Quick Motion rollers? Equipment trainer	258	28166	August 21, 2025
Rollers and resistance Equipment trainer	19	9079	February 28, 2023

Experiences with the Elite Nero Rollers

Related topics