PowerMatch Experiences

[mcneese.chad]

@enki42

You need to double it if you just have one pedal measuring power.

• No, using the Favero “double” option is NOT correct in this case:

Assioma Uno pedals

For the Uno, we will take your power reading and double it when pulling it into TrainerRoad. This is true for all versions of the firmware. For the Duo, as long as you have updated the Favero to a firmware version 4.04 or newer the pedals will send a combined L/R power reading over both Bluetooth and ANT+

• Followed by this:

Assioma Uno pedals

When paired with TrainerRoad, we will take your left pedal’s power and double it to account for the fact that you have only one pedal paired. This all happens automatically, and there should not be an option to “double the power.” Our Devices Tab is already automated to do this for you. So your power will not be 50% low, not 200%, but just right

• And this:

Assioma Uno pedals

Alright, so as I mentioned, TrainerRoad doubles the power automatically. During testing, we discovered that TR cannot “sense” if the power has already been doubled or not, which means that if you double it in the Assioma app, it will be quadrupled in TR. So do not enable the “double power” option within the Assioma app, and you will be good to go