# What gets ultrasonically cleaned on a bike?

**URL:** <https://www.trainerroad.com/forum/t/what-gets-ultrasonically-cleaned-on-a-bike/38259>\
**Category:** Equipment\
**Created:** [June 22, 2020, 10:02pm UTC](https://www.trainerroad.com/forum/t/what-gets-ultrasonically-cleaned-on-a-bike/38259 "2020-06-22T22:02:49Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![chrismlim](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/chrismlim/32/7757_2.png) [@chrismlim](https://www.trainerroad.com/forum/u/chrismlim)\
**Post date:** [June 22, 2020, 10:02pm UTC](https://www.trainerroad.com/forum/t/what-gets-ultrasonically-cleaned-on-a-bike/38259/1 "2020-06-22T22:02:49Z")

</div>

Hello all,

I’m finally in the market for a new bike. It’s been a long time since I got my last one (I’m pretty sure 10-speed cassettes were just being thought about at that time) and a lot has changed.

I’ve always been pretty OCD about keeping my bikes clean and I plan on waxing chains on the new one, but what has me confused is ultrasonic cleaning. Just by reading the forums, it seems that the chain usually needs a quick wipe down after most rides without a problem, but should I clean the chain, cassette, and chainrings too?

Thanks.

---

<div class="post-metadata">

**Author:** ![rockrabbit](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/rockrabbit/32/13181_2.png) [@rockrabbit](https://www.trainerroad.com/forum/u/rockrabbit)\
**Post date:** [June 23, 2020, 12:17pm UTC](https://www.trainerroad.com/forum/t/what-gets-ultrasonically-cleaned-on-a-bike/38259/2 "2020-06-23T12:17:55Z")

</div>

[https://www.trainerroad.com/forum/t/chain-waxing-tutorial/](https://www.trainerroad.com/forum/t/chain-waxing-tutorial/)

Greetings,

Follow the above thread for answers to your questions

👍🏻

---

<div class="post-metadata">

**Author:** ![STP](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/stp/32/15688_2.png) [@STP](https://www.trainerroad.com/forum/u/STP)\
**Post date:** [June 23, 2020, 1:30pm UTC](https://www.trainerroad.com/forum/t/what-gets-ultrasonically-cleaned-on-a-bike/38259/3 "2020-06-23T13:30:25Z")

</div>

I don’t wax but I use my ultrasonic cleaner for my regular chain cleaning. If you use quick links it take as quick as any other method and less messy. You can reuse the fluid for several cleanings so its just drop the chain in, hit start and run it for a couple minutes. I use a little disposable aluminum pan to carry the chain to the sink for rinsing. Start to finishing up the clean chain relube on the bike is around 10 minutes or so. once you invest in the ultrasonic cleaner, waxing to me does not seem worth the effort.

The cleaner is great for cassettes too but I only do that a couple times a year out of laziness. It would be great for chain rings too but you need a pretty big one (e.g. expensive) for them to fit.

---

<div class="post-metadata">

**Author:** ![Power13](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/power13/32/92171_2.png) [@Power13](https://www.trainerroad.com/forum/u/Power13)\
**Post date:** [June 23, 2020, 1:44pm UTC](https://www.trainerroad.com/forum/t/what-gets-ultrasonically-cleaned-on-a-bike/38259/4 "2020-06-23T13:44:15Z")

</div>

> [@STP](#):
>
> would be great for chain rings too but you need a pretty big one (e.g. expensive) for them to fit.

I can get my small CR in my cleaner and most of my big ring…for the big ring, I just flip it over and run it through twice.

---

<div class="post-metadata">

**Author:** ![gcarver](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/gcarver/32/15266_2.png) [@gcarver](https://www.trainerroad.com/forum/u/gcarver)\
**Post date:** [June 23, 2020, 4:04pm UTC](https://www.trainerroad.com/forum/t/what-gets-ultrasonically-cleaned-on-a-bike/38259/5 "2020-06-23T16:04:23Z")

</div>

You don’t need to ultrasonically clean the cassetee/chainring. Soapy water and a brush will get it cleaned just fine. If you want to do it, that’s fine, but I’d say it’s more trouble than it’s worth with all the bolts and things. The chain only needs to be run through the u-s bath when it’s new and before rewaxing a gritty/sandy chain.

---

<div class="post-metadata">

**Author:** ![julianoliver](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/julianoliver/32/229_2.png) [@julianoliver](https://www.trainerroad.com/forum/u/julianoliver)\
**Post date:** [June 23, 2020, 4:09pm UTC](https://www.trainerroad.com/forum/t/what-gets-ultrasonically-cleaned-on-a-bike/38259/6 "2020-06-23T16:09:06Z")

</div>

Here is the thread on ultrasonic cleaning:

[https://www.trainerroad.com/forum/t/ultrasonic-cleaning/3939](https://www.trainerroad.com/forum/t/ultrasonic-cleaning/3939)

---

<div class="post-metadata">

**Author:** ![mcneese.chad](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/mcneese.chad/32/15056_2.png) [@mcneese.chad](https://www.trainerroad.com/forum/u/mcneese.chad)\
**Post date:** [June 23, 2020, 4:22pm UTC](https://www.trainerroad.com/forum/t/what-gets-ultrasonically-cleaned-on-a-bike/38259/7 "2020-06-23T16:22:50Z")

</div>

Closed on June 23, 2020, 4:22pm UTC


