# Wahoo Elemnt workout screen

**URL:** <https://www.trainerroad.com/forum/t/wahoo-elemnt-workout-screen/32249>\
**Category:** Equipment\
**Created:** [March 28, 2020, 12:16pm UTC](https://www.trainerroad.com/forum/t/wahoo-elemnt-workout-screen/32249 "2020-03-28T12:16:25Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cory.Rood](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/cory.rood/32/77597_2.png) [@Cory.Rood](https://www.trainerroad.com/forum/u/Cory.Rood)\
**Post date:** [March 28, 2020, 12:16pm UTC](https://www.trainerroad.com/forum/t/wahoo-elemnt-workout-screen/32249/1 "2020-03-28T12:16:25Z")

</div>

What data do you have on your workout screen when doing outside TR workouts?

I did Carson outside on Thursday with these:

Target Watts  
3 Sec Avg Watts  
Remaining lap time  
BPM  
RPM

Hitting target was a challenge as I would watch the average watts and would overshoot the target and then adjust and undershoot the target. rinse and repeat for the intervals. flatter terrain was easier to tighten it up but still challenging.

I think I will change out 3 sec average for 10 second average and add Lap Avg Watts

What fields do you use?

---

<div class="post-metadata">

**Author:** ![svens](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/svens/32/118037_2.png) [@svens](https://www.trainerroad.com/forum/u/svens)\
**Post date:** [March 28, 2020, 5:15pm UTC](https://www.trainerroad.com/forum/t/wahoo-elemnt-workout-screen/32249/2 "2020-03-28T17:15:46Z")

</div>

I use factory default but zoom in until only Target Watts & 3 Sec Avg Watts remain.  
There was topic on podcasts about this: [How to hold steady power over rolling terrain](https://youtu.be/mkSYblq2ZIw?t=4124)

---

<div class="post-metadata">

**Author:** ![bbarrera](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/bbarrera/32/14734_2.png) [@bbarrera](https://www.trainerroad.com/forum/u/bbarrera)\
**Post date:** [March 28, 2020, 5:21pm UTC](https://www.trainerroad.com/forum/t/wahoo-elemnt-workout-screen/32249/3 "2020-03-28T17:21:35Z")

</div>

> [@Cory.Rood](#):
>
> think I will change out 3 sec average for 10 second average and add Lap Avg Watts

That’s what I do:

> [@How do you do it: Zone discipline?](https://www.trainerroad.com/forum/t/how-do-you-do-it-zone-discipline/31282/43):
>
> @simonicusfacilis took a pic tonight for ya, the game I play is to keep 10-sec power and lap power at my target. On this part of the ride I was shooting for low 150s.

---

<div class="post-metadata">

**Author:** ![philrcook](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/philrcook/32/15797_2.png) [@philrcook](https://www.trainerroad.com/forum/u/philrcook)\
**Post date:** [March 28, 2020, 5:24pm UTC](https://www.trainerroad.com/forum/t/wahoo-elemnt-workout-screen/32249/4 "2020-03-28T17:24:35Z")

</div>

Personally I leave on the default and I’m not sure I understand how it helps moving to 10 second average power? Your power will still actually be fluctuating just the same so you’re not improving the workout in my opinion. Is it better to leave as 3 second average power to help you learn how better to hold a more consistent power?

---

<div class="post-metadata">

**Author:** ![bbarrera](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/bbarrera/32/14734_2.png) [@bbarrera](https://www.trainerroad.com/forum/u/bbarrera)\
**Post date:** [March 28, 2020, 5:27pm UTC](https://www.trainerroad.com/forum/t/wahoo-elemnt-workout-screen/32249/5 "2020-03-28T17:27:48Z")

</div>

Lap power fluctuates slower than 10-sec power, which fluctuates slower than 3-sec, which fluctuates slower than power.

---

<div class="post-metadata">

**Author:** ![Cory.Rood](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/cory.rood/32/77597_2.png) [@Cory.Rood](https://www.trainerroad.com/forum/u/Cory.Rood)\
**Post date:** [March 28, 2020, 7:44pm UTC](https://www.trainerroad.com/forum/t/wahoo-elemnt-workout-screen/32249/6 "2020-03-28T19:44:44Z")

</div>

I understand my power doesn’t change, but what does change is me trying to micromanage my power to the target, a 10 second average will change slower than a 3 second or instant. It’s all a mental game. I agree there is alot of lower hanging fruit for riding a a more consistent effort.

---

<div class="post-metadata">

**Author:** ![philrcook](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/philrcook/32/15797_2.png) [@philrcook](https://www.trainerroad.com/forum/u/philrcook)\
**Post date:** [March 28, 2020, 9:55pm UTC](https://www.trainerroad.com/forum/t/wahoo-elemnt-workout-screen/32249/7 "2020-03-28T21:55:26Z")

</div>

Yeah that makes sense, sorry not thought of it that way. Anything that helps reduce mental stress can only lead to a better workout.  
Ride safe, enjoy the outdoor workouts, I’m really starting to enjoy them.

---

<div class="post-metadata">

**Author:** ![Cory.Rood](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/cory.rood/32/77597_2.png) [@Cory.Rood](https://www.trainerroad.com/forum/u/Cory.Rood)\
**Post date:** [March 28, 2020, 11:22pm UTC](https://www.trainerroad.com/forum/t/wahoo-elemnt-workout-screen/32249/9 "2020-03-28T23:22:18Z")

</div>

I hadn’t considered NP! not a bad thought!, Might put that next to Lap average as that would be a great indicator as to consistency.

---

<div class="post-metadata">

**Author:** ![bbarrera](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/bbarrera/32/14734_2.png) [@bbarrera](https://www.trainerroad.com/forum/u/bbarrera)\
**Post date:** [March 28, 2020, 11:40pm UTC](https://www.trainerroad.com/forum/t/wahoo-elemnt-workout-screen/32249/10 "2020-03-28T23:40:43Z")

</div>

NP not really valid for less than ~20 minutes, so I left that on my metrics summary screen.

---

<div class="post-metadata">

**Author:** ![Cory.Rood](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/cory.rood/32/77597_2.png) [@Cory.Rood](https://www.trainerroad.com/forum/u/Cory.Rood)\
**Post date:** [March 29, 2020, 7:23pm UTC](https://www.trainerroad.com/forum/t/wahoo-elemnt-workout-screen/32249/12 "2020-03-29T19:23:25Z")

</div>

my thought on NP was to compare Lap NP to average power, should give a good indication of how consistent you are for the interval depending on how close the 2 are to each other. No?

---

<div class="post-metadata">

**Author:** ![bbarrera](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/bbarrera/32/14734_2.png) [@bbarrera](https://www.trainerroad.com/forum/u/bbarrera)\
**Post date:** [March 29, 2020, 7:52pm UTC](https://www.trainerroad.com/forum/t/wahoo-elemnt-workout-screen/32249/13 "2020-03-29T19:52:36Z")

</div>

🤷‍♂️ my own thought is you should simply compare target power to average power and be done with it.

Be careful when using NP to draw conclusions because its easy to misuse NP as per this article: [https://help.trainingpeaks.com/hc/en-us/articles/218243287-Why-is-my-normalized-power-lower-than-my-average-power-](https://help.trainingpeaks.com/hc/en-us/articles/218243287-Why-is-my-normalized-power-lower-than-my-average-power-)

Normalized power was conceived as a way to compare physiological “cost” of different efforts. That is not exactly what you are proposing to do. Not that your approach is wrong, but if you continue using it outside what is was designed to do, you may start losing sight of what it was designed to do and per the article above how applying to intervals can give misleading results.

---

<div class="post-metadata">

**Author:** ![Cory.Rood](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/cory.rood/32/77597_2.png) [@Cory.Rood](https://www.trainerroad.com/forum/u/Cory.Rood)\
**Post date:** [April 1, 2020, 2:12pm UTC](https://www.trainerroad.com/forum/t/wahoo-elemnt-workout-screen/32249/15 "2020-04-01T14:12:09Z")

</div>

Wahoo didn’t have 10 second power so I used 20 second power. Didn’t use NP.

Did Tunnabora outside last night and did alot better than the previous weeks attempt at Carson. Part of that is that I picked a better route(really the only option around here that is consistent enough for anything over 1 minute long.) But having Interval(Lap) Average and 20 second power worked wonders to keep me from trying to micromanage my power to the target.

[Tunnabora](https://www.trainerroad.com/app/career/coryrood/rides/76884527-tunnabora)  
[Carson](https://www.trainerroad.com/app/career/coryrood/rides/76307230-carson)

I do wish outdoor workouts posted could overlay the target power on the graph aswell.

---

<div class="post-metadata">

**Author:** ![jacksonianc](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/jacksonianc/32/63976_2.png) [@jacksonianc](https://www.trainerroad.com/forum/u/jacksonianc)\
**Post date:** [April 1, 2020, 5:36pm UTC](https://www.trainerroad.com/forum/t/wahoo-elemnt-workout-screen/32249/17 "2020-04-01T17:36:57Z")

</div>

I mirrored the TR app, these were the fields. I haven’t found that an overall Average Power or NP is necessary.

 ![image](https://global.discourse-cdn.com/trainerroad/original/3X/e/0/e0125699c0e83ec0a1b7a1d1568b8b40b1dd16af.png)
