# Vector 3 Pedal Axle Play

**URL:** <https://www.trainerroad.com/forum/t/vector-3-pedal-axle-play/18704>\
**Category:** Equipment\
**Created:** [July 25, 2019, 5:22pm UTC](https://www.trainerroad.com/forum/t/vector-3-pedal-axle-play/18704 "2019-07-25T17:22:24Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![kurt.braeckel](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/kurt.braeckel/32/116719_2.png) [@kurt.braeckel](https://www.trainerroad.com/forum/u/kurt.braeckel)\
**Post date:** [August 3, 2019, 5:26pm UTC](https://www.trainerroad.com/forum/t/vector-3-pedal-axle-play/18704/13 "2019-08-03T17:26:20Z")

</div>

In [this thread](https://www.trainerroad.com/forumt/garmin-vector-3-maintenance-and-lubrication/15012) I talked about how I did the maintenance as Garmin described, and it didn’t solve my slight binding issue, and then it turned out that the separation was causing my occasional BLE dropouts as well. Garmin replaced my 18-month old Vector 3 pedals with a brand new set… I put down the deposit and never had to stop training with power. Pret-ty sweet deal, relatively speaking…

---

_[View the full topic](https://www.trainerroad.com/forum/t/vector-3-pedal-axle-play/18704)._
