# Trainer resistance suddenly harder

**URL:** <https://www.trainerroad.com/forum/t/trainer-resistance-suddenly-harder/12447>\
**Category:** Equipment\
**Tags:** trainer\
**Created:** [February 26, 2019, 11:02am UTC](https://www.trainerroad.com/forum/t/trainer-resistance-suddenly-harder/12447 "2019-02-26T11:02:15Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![mcneese.chad](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/mcneese.chad/32/15056_2.png) [@mcneese.chad](https://www.trainerroad.com/forum/u/mcneese.chad)\
**Post date:** [February 26, 2019, 1:23pm UTC](https://www.trainerroad.com/forum/t/trainer-resistance-suddenly-harder/12447/3 "2019-02-26T13:23:43Z")

</div>

Yes, retest.

The timeline is a bit confusing, but ANY TIME you change ANY equipment as part of a Virtual Power setup, you must retest. You did it properly with the tire change.

But I don’t see that you retested after swapping to the rollers. Without a dedicated power meter, you can’t just swap between trainers or rollers and expect the VP numbers to align. They just don’t work that way.

So a test in each device is necessary. And you can’t likely use the same FTP on both devices, unless you get a real power meter.

---

_[View the full topic](https://www.trainerroad.com/forum/t/trainer-resistance-suddenly-harder/12447)._
