# Road axs range--how far can you push it?

**URL:** <https://www.trainerroad.com/forum/t/road-axs-range-how-far-can-you-push-it/80838>\
**Category:** Equipment\
**Created:** [February 7, 2023, 6:23pm UTC](https://www.trainerroad.com/forum/t/road-axs-range-how-far-can-you-push-it/80838 "2023-02-07T18:23:14Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![peasemike](https://avatars.discourse-cdn.com/v4/letter/p/ba8739/32.png) [@peasemike](https://www.trainerroad.com/forum/u/peasemike)\
**Post date:** [February 7, 2023, 6:23pm UTC](https://www.trainerroad.com/forum/t/road-axs-range-how-far-can-you-push-it/80838/1 "2023-02-07T18:23:14Z")

</div>

I recently purchased a gravel bike with Axs road. Actually, it came with two set-ups, a road and an Xplr set-up. I need a bailout gear ever so smaller than the 35x36 with the road setup for a few rides (sustained 12+% avg with marginal traction). I’m currently using an unsanctioned config on my trainer, using the Xplr rear mech 10-44 with the 2x 48x35. It’s ok, but not great–probably because the Xplr was designed to be 1x only and the top pulley is offset.  
I recently saw the Rotor 11-39. I was thinking this could be better option. A 48x11 is good enough and a 35x39 should be fine as well. Has anyone tried a 39t rear cog with an Axs road mech? All rear mechs in the past have had some degree of cheat and this is only 3 teeth. Back in the day, we would push them much further. That said, they ain’t cheap, so I don’t want to experiment if someone has already learned the hard way it doesn’t work.  
I don’t think there is a frankenderailleur setup I can do. To my knowledge any aftermarket Sram Road compatible cage longer than those designed for a 36 tooth is offset. If someone knows of one, that would be great to know about as well.  
Thanks!

---

<div class="post-metadata">

**Author:** ![jfranci3](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/jfranci3/32/12908_2.png) [@jfranci3](https://www.trainerroad.com/forum/u/jfranci3)\
**Post date:** [February 8, 2023, 2:11am UTC](https://www.trainerroad.com/forum/t/road-axs-range-how-far-can-you-push-it/80838/2 "2023-02-08T02:11:36Z")

</div>

> [@peasemike](#):
>
> tri

I use the 11-39 12sp on my AXS XPLR 1x. I like the ratios better than the Sram unit. I’m going to try it with my Force 11sp road (converted to 12sp) medium cage in a minute. IIRC, the 11-39 was a bit clunky shifter to smaller cogs, but that was just me thinking about it too much. I also have the 11-46, which I’m going to put on the gravel bike. I was going to use it for Shimano 12sp MTB, but it doesn’t work for that.

---

<div class="post-metadata">

**Author:** ![JoeNation](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/joenation/32/12890_2.png) [@JoeNation](https://www.trainerroad.com/forum/u/JoeNation)\
**Post date:** [February 8, 2023, 9:52am UTC](https://www.trainerroad.com/forum/t/road-axs-range-how-far-can-you-push-it/80838/3 "2023-02-08T09:52:00Z")

</div>

Smaller chainrings? The SRAM Wide 43/30 rings with a 10-36 cassette would give you a smaller bottom gear than 35/39. 43/10 is only a smidge smaller than 48/11 (as in imperceptibly small).

---

<div class="post-metadata">

**Author:** ![Cory.Rood](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/cory.rood/32/77597_2.png) [@Cory.Rood](https://www.trainerroad.com/forum/u/Cory.Rood)\
**Post date:** [February 8, 2023, 1:21pm UTC](https://www.trainerroad.com/forum/t/road-axs-range-how-far-can-you-push-it/80838/4 "2023-02-08T13:21:10Z")

</div>

Get the 46/33 chainrings? 33-36 low is just a tad bit taller than 35-39 and 46-10 is taller than 48-11.

---

<div class="post-metadata">

**Author:** ![jfranci3](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/jfranci3/32/12908_2.png) [@jfranci3](https://www.trainerroad.com/forum/u/jfranci3)\
**Post date:** [February 8, 2023, 2:13pm UTC](https://www.trainerroad.com/forum/t/road-axs-range-how-far-can-you-push-it/80838/5 "2023-02-08T14:13:47Z")

</div>

I think the road RD is already stretched at 36t. The Wide looks maybe to 39T  
[https://blog.3t.bike/2020/05/14264/gravel-bike-tech-new-force-axs-etap-for-gravel-sram-gravel/](https://blog.3t.bike/2020/05/14264/gravel-bike-tech-new-force-axs-etap-for-gravel-sram-gravel/) (search comments for 39)

How fast are you trying to pedal? Your 10-44 2x setup really only gives you a couple of gears over 30mph and maybe a low gear over an Rotor 1x setup. 2x12sp is kinda silly anyway.

> **[Graphical Gear Calculator for Bicycles](https://www.gear-calculator.com/?GR=DERS&KB=35,48&RZ=10,11,12,13,15,17,19,21,24,28,32,36&UF=2150&TF=90&SL=2.6&UN=MPH&DV=teeth&GR2=DERS&KB2=44&RZ2=11,12,13,15,17,19,22,25,29,34,39,46&UF2=2150)**
>
> The bicycle gear calculator displays graphically the gearing of derailleur gears and gear hubs. 
> It can be used to compare different setups to find the optimal gearing for all kinds of bicycles.

Smaller chainrings would be a 5% difference, 11-39 gets you 10% on the low end. I assume Sram will put out a 10/11-40 this season. EDIT: Rumor looks like a 10-38T to work with the WIDE and XPLR - so your 39T wide combo should work.

> **[Graphical Gear Calculator for Bicycles](https://www.gear-calculator.com/?GR=DERS&KB=33,46&RZ=10,11,12,13,15,17,19,21,24,28,32,36&UF=2150&TF=90&SL=2.6&UN=MPH&DV=speed&GR2=DERS&KB2=35,48&RZ2=10,11,12,13,15,17,19,21,24,28,32,36&UF2=2150)**
>
> The bicycle gear calculator displays graphically the gearing of derailleur gears and gear hubs. 
> It can be used to compare different setups to find the optimal gearing for all kinds of bicycles.

Maybe add the data to your garmin/wahoo unit and see what gears you actually use most.
