# PSA - Shimano recalls 760,000 Hollowtech road cranks

**URL:** <https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991>\
**Category:** Equipment\
**Created:** [September 21, 2023, 1:50pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991 "2023-09-21T13:50:09Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![mcneese.chad](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/mcneese.chad/32/15056_2.png) [@mcneese.chad](https://www.trainerroad.com/forum/u/mcneese.chad)\
**Post date:** [September 21, 2023, 1:50pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/1 "2023-09-21T13:50:09Z")

</div>

> **[Shimano Recalls Cranksets for Bicycles Due to Crash Hazard](https://www.cpsc.gov/Recalls/2023/Shimano-Recalls-Cranksets-for-Bicycles-Due-to-Crash-Hazard)**
>
> Consumers should immediately stop using the cranksets manufactured before July 1, 2019, and contact an authorized Shimano dealer to schedule a free crankset inspection. Only consumers whose cranksets show signs of bonding separation or delamination...

> **[Shimano announces official recall for Ultegra and Dura-Ace cranksets - Escape...](https://escapecollective.com/shimano-road-crankset-recall/)**
>
> It's taken a while, but Shimano has finally announced an official recall for all those broken cranks you may have seen online.

> **[Shimano Announces Voluntary Inspection & Replacement Campaign for Some...](https://bikerumor.com/shimano-11-speed-road-crankset-inspection-recall/)**
>
> It's official. Shimano has started an "inspection and replacement campaign" for 11-speed cranksets due to bonding failures.

> **[Shimano recall | 2.8 million cranks affected globally](https://www.bikeradar.com/news/shimano-crankset-recall/)**
>
> Global 'inspection and replacement' process confirmed for affected 11-speed Dura-Ace and Ultegra cranks

> **[Shimano recalls 760,000 Hollowtech road cranks after receiving 4,500 incident...](https://www.bicycleretailer.com/recalls/2023/09/21/shimano-recalls-760-000-hollowtech-road-cranks-after-receiving-4-500-incident)**
>
> WASHINGTON (BRAIN) — Shimano says 760,000 11-speed Hollowtech road cranksets will need to be inspected for signs of delamination. The affected cranks — Dura-Ace and Ultegra models manufactured prior to July 2019 — can separate and break; the company...

Looks like they finally had to bite the bullet after MANY clear reports of problems that we have seen around for years. Better late than never? 🤷‍♂️

* * *

Will have to dig into this as I suspect I have more than one instance of these that could be affected. Making it more ‘fun’ is the fact that I have 3 left-side crank power meters among them…

- And upon just watching the Shimano video… cranks with 3rd party power meters installed (_Stages & 4iiii to name the most likely_) are not covered under the Shimano warranty policy, but Shimano is “making an exception” by choosing to include and replace as appropriate.
- However, if these 3rd party PM cranks are found to have an issue and need replacement, the new crank will be a normal Shimano version WITHOUT a power meter. 😮

Per the EC article:

> Some affected cranks will also have had third-party power meters installed, but Shimano says it has a plan for that.
> 
> “Any items that are found to fail during inspection and that are sent back to Shimano will be replaced free of charge without the third-party power meter attached. Shimano will be providing a rebate in the form of a check to the consumer where the consumer can use that towards the replacement of the third-party power meter.”
> 
> Those rebates will range from US$300-325 / CA$400-430 for single-sided power meters, and US$500 / CA$650 for dual-sided ones: perhaps not enough to have new third-party power meters installed on the replacement cranks, but better than nothing.

---

<div class="post-metadata">

**Author:** ![teddygram](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/teddygram/32/12895_2.png) [@teddygram](https://www.trainerroad.com/forum/u/teddygram)\
**Post date:** [September 21, 2023, 2:05pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/2 "2023-09-21T14:05:34Z")

</div>

👏🏻

I have seen this a few times also, I also have a bunch of Shimano cranks so its good they are stepping up but holy cow what a hit on them.

---

<div class="post-metadata">

**Author:** ![mcneese.chad](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/mcneese.chad/32/15056_2.png) [@mcneese.chad](https://www.trainerroad.com/forum/u/mcneese.chad)\
**Post date:** [September 21, 2023, 2:09pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/3 "2023-09-21T14:09:16Z")

</div>

Yeah, I imagine that the $ value hit from this will be massive.

---

<div class="post-metadata">

**Author:** ![teddygram](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/teddygram/32/12895_2.png) [@teddygram](https://www.trainerroad.com/forum/u/teddygram)\
**Post date:** [September 21, 2023, 2:10pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/4 "2023-09-21T14:10:41Z")

</div>

I mean, respectful manufacturing process lets say they pay $25 per crank as an average - thats a potential max of $19,000,000… Ouch

This is a good bulletin you have to find on one of the articles. Its the official Shimano Embargo document.

> **[north\_american\_press\_release\_shimano\_crankset\_inspection\_recall.pdf](https://www.bicycleretailer.com/sites/default/files/downloads/article/north_american_press_release_shimano_crankset_inspection_recall.pdf)**
>
> 791.05 KB

---

<div class="post-metadata">

**Author:** ![Power13](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/power13/32/92171_2.png) [@Power13](https://www.trainerroad.com/forum/u/Power13)\
**Post date:** [September 21, 2023, 2:14pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/5 "2023-09-21T14:14:30Z")

</div>

Fascinating that it has taken this long for them to issue a recall…I would love to understand what was the mitigating factor that caused them to issue the recall.

As suspected, the incident rate of these failures is astonishingly low…basically 1/2 of 1 percent. This aligns with their claim that they expect less than 1% of the inspected cranks to require replacement. My guess (and it is only a guess) would be that it it was the sheer number of reports, and not the percentage of incidents, that finally caused them to issue a recall.

I have an Ultegra and a DA crank that fall under the recall…but the DA crank is a Stages unit (although I am not currently using it as my PM). The Ultegra crank is a no-brainer to deal with…will have to decide what I want to do about the DA crank, I guess.

---

<div class="post-metadata">

**Author:** ![Power13](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/power13/32/92171_2.png) [@Power13](https://www.trainerroad.com/forum/u/Power13)\
**Post date:** [September 21, 2023, 2:16pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/6 "2023-09-21T14:16:03Z")

</div>

> [@teddygram](#):
>
> I mean, respectful manufacturing process lets say they pay $25 per crank as an average - thats a potential max of $19,000,000… Ouch

$25 / crank for what…inspecting them?

---

<div class="post-metadata">

**Author:** ![mcneese.chad](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/mcneese.chad/32/15056_2.png) [@mcneese.chad](https://www.trainerroad.com/forum/u/mcneese.chad)\
**Post date:** [September 21, 2023, 2:18pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/7 "2023-09-21T14:18:40Z")

</div>

Yeah, I am not sure what I can share but for actual units requiring replacement, the values are much higher than $25 with all the material costs and dealer service payment.

The only saving grace here is that the presumed amount of actual replacements is a small fraction of the base number affected in the total date & production range covered.

---

<div class="post-metadata">

**Author:** ![teddygram](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/teddygram/32/12895_2.png) [@teddygram](https://www.trainerroad.com/forum/u/teddygram)\
**Post date:** [September 21, 2023, 2:19pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/8 "2023-09-21T14:19:25Z")

</div>

Hypothetical number I just made up, in this scenario it cost them $25/complete process (to furnish new product and process old product). I was being overly conservative with the number.

What I am more impressed with is that they sold (at minimum) 760,000 units between June 1, 2012 to June 30, 2019.

That is 7-years or 108,571 units a year for Ultegra and Dura-ace only, it just gave me more prospective at how big Shimano cycling really is.

---

<div class="post-metadata">

**Author:** ![Power13](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/power13/32/92171_2.png) [@Power13](https://www.trainerroad.com/forum/u/Power13)\
**Post date:** [September 21, 2023, 2:24pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/9 "2023-09-21T14:24:10Z")

</div>

> [@teddygram](#):
>
> Hypothetical number I just made up, in this scenario it cost them $25/complete process (to furnish new product and process old product).

I have no idea what the number will be, but you are also assuming a 100% compliance rate. No way they will get close to that number…many of those cranks are no longer in service and even more consumers will never see the bulletin…and then even more won’t bother to take their cranks in for inspection.

Shimano estimates that the replacement rate will be less than 1% (again, which aligns with the failure rate data), so their actual exposure from a replacement perspective will probably be relatively low for a recall of this size. Inspection labor will be the biggest component, I would guess.

---

<div class="post-metadata">

**Author:** ![teddygram](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/teddygram/32/12895_2.png) [@teddygram](https://www.trainerroad.com/forum/u/teddygram)\
**Post date:** [September 21, 2023, 2:27pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/11 "2023-09-21T14:27:40Z")

</div>

You are correct, let me state it another way as sometimes I get excited and dont complete my entire thought process.

If they manufactured 760,000 units and the manufacturing cost of them was only $25 that’s $19M in just manufacturing cost only. That’s just such a big number to me, helped me grasp how big the company is.

They most likely are closer to $130 for manufacturing though.

---

<div class="post-metadata">

**Author:** ![Power13](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/power13/32/92171_2.png) [@Power13](https://www.trainerroad.com/forum/u/Power13)\
**Post date:** [September 21, 2023, 2:29pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/12 "2023-09-21T14:29:02Z")

</div>

> [@teddygram](#):
>
> What I am more impressed with is that they sold (at minimum) 760,000 units between June 1, 2012 to June 30, 2019.
> 
> That is 7-years or 108,571 units a year for Ultegra and Dura-ace only, it just gave me more prospective at how big Shimano cycling really is.

And this is only for the US & Canada…

But honestly, those numbers didn’t surprise me that much. I would actually say it emphasizes how few high bikes the suppliers sell in a given year vs. the total number of bike imports.

---

<div class="post-metadata">

**Author:** ![cartsman](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/cartsman/32/18565_2.png) [@cartsman](https://www.trainerroad.com/forum/u/cartsman)\
**Post date:** [September 21, 2023, 2:31pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/14 "2023-09-21T14:31:11Z")

</div>

> [@Power13](#):
>
> As suspected, the incident rate of these failures is astonishingly low…basically 1/2 of 1 percent

I wonder if this is a factor of how many people buy high end bikes and then don’t ride them much! As I personally know quite a few people who have had Hollowtech crankset failures (including me), and my sample size certainly isn’t in the high enough hundreds for that to be 0.5%. But I do suspect that the people I know are much higher volume than the average.

---

<div class="post-metadata">

**Author:** ![teddygram](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/teddygram/32/12895_2.png) [@teddygram](https://www.trainerroad.com/forum/u/teddygram)\
**Post date:** [September 21, 2023, 2:33pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/15 "2023-09-21T14:33:49Z")

</div>

Yes they are, a lot of people dislike hambini but he did anaylisis on this last year;

> **[Shimano Crankset Failures: An Engineering Analysis - Hambini Engineering](https://www.hambini.com/shimano-crankset-failures-an-engineering-analysis/)**
>
> Shimano have had some issues with their high end cranksets in recent times. It seems as though the Ultegra and Dura Ace cranksets are the primary units

---

<div class="post-metadata">

**Author:** ![Power13](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/power13/32/92171_2.png) [@Power13](https://www.trainerroad.com/forum/u/Power13)\
**Post date:** [September 21, 2023, 2:34pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/16 "2023-09-21T14:34:57Z")

</div>

Yeah, usage almost certainly factors into the failure rate…I would also say environmental conditions and how the cranks are used also play a role. My guess would be that the failure rate is higher in areas with greater humidity and that those who ride in the rain often will also see a higher failure rate.

---

<div class="post-metadata">

**Author:** ![Power13](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/power13/32/92171_2.png) [@Power13](https://www.trainerroad.com/forum/u/Power13)\
**Post date:** [September 21, 2023, 2:36pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/17 "2023-09-21T14:36:29Z")

</div>

> [@teddygram](#):
>
> If they manufactured 760,000 units and the manufacturing cost of them was only $25 that’s $19M in just manufacturing cost only. That’s just such a big number to me, helped me grasp how big the company is.

Ah, gotcha…so you were just looking at this from the perspective of their original revenue intake, not the recall cost?

---

<div class="post-metadata">

**Author:** ![Power13](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/power13/32/92171_2.png) [@Power13](https://www.trainerroad.com/forum/u/Power13)\
**Post date:** [September 21, 2023, 2:41pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/18 "2023-09-21T14:41:56Z")

</div>

It is worth reading the Escape collective article posted at the top of the thread…they have more details about the inspection process, what cranks will be used for replacements (a unique crank based on the 12 spd design) as well as updated info re: how 3rd party power meter cranks will be handled (they are giving consumers checks / rebates).

---

<div class="post-metadata">

**Author:** ![AJS914](https://avatars.discourse-cdn.com/v4/letter/a/919ad9/32.png) [@AJS914](https://www.trainerroad.com/forum/u/AJS914)\
**Post date:** [September 21, 2023, 2:50pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/19 "2023-09-21T14:50:34Z")

</div>

> [@Power13](#):
>
> I have no idea what the number will be, but you are also assuming a 100% compliance rate. No way they will get close to that number…many of those cranks are no longer in service and even more consumers will never see the bulletin…and then even more won’t bother to take their cranks in for inspection.

Call me cynical but it’s probably cheaper to delay this recall for years, pay out the few injured riders, and then make it an inspection recall. Riders with old bikes hanging in garages aren’t going to be keen to take their bike apart and ship it off for an inspection.

---

<div class="post-metadata">

**Author:** ![Power13](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/power13/32/92171_2.png) [@Power13](https://www.trainerroad.com/forum/u/Power13)\
**Post date:** [September 21, 2023, 2:55pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/20 "2023-09-21T14:55:27Z")

</div>

> [@AJS914](#):
>
> Riders with old bikes hanging in garages aren’t going to be keen to take their bike apart and ship it off for an inspection.

They don’t have to…they just need to take it to an authorized dealer and have it inspected.

But the data doesn’t really back up your cynicism…it is a .5% failure rate. Statistically insignificant, almost. I’d be thrilled with any of our products having an actual failure rate that low. They likely did not have a recall before this because there was not any data indicating a recall was warranted.

---

<div class="post-metadata">

**Author:** ![AJS914](https://avatars.discourse-cdn.com/v4/letter/a/919ad9/32.png) [@AJS914](https://www.trainerroad.com/forum/u/AJS914)\
**Post date:** [September 21, 2023, 3:07pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/21 "2023-09-21T15:07:03Z")

</div>

You are way too generous with your appraisal of a profit seeking conglomerate.

I think that rate of failure is way too high on a critical part that could cause you to lose your teeth. Just going anecdotally based on the number of broken cranks I’ve seen posted to cycling forums, I’d say that this crank seems to break at a rate of 1000x more frequently than any other crankset out there.

---

<div class="post-metadata">

**Author:** ![Power13](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/power13/32/92171_2.png) [@Power13](https://www.trainerroad.com/forum/u/Power13)\
**Post date:** [September 21, 2023, 3:10pm UTC](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991/22 "2023-09-21T15:10:57Z")

</div>

So we should decide if recalls should occur based on the anecdotal “data” of who / how many people are posting on IG and cycling forums vs. the actual data?

The numbers are literally posted for everyone to see…1/2 of 1% failure rate. Again, staggeringly low.

[Next page](https://www.trainerroad.com/forum/t/psa-shimano-recalls-760-000-hollowtech-road-cranks/86991.md?page=2)
