# Power meters vs kickr

**URL:** <https://www.trainerroad.com/forum/t/power-meters-vs-kickr/86786>\
**Category:** Equipment\
**Created:** [September 12, 2023, 5:51pm UTC](https://www.trainerroad.com/forum/t/power-meters-vs-kickr/86786 "2023-09-12T17:51:49Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![rishim](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/rishim/32/12890_2.png) [@rishim](https://www.trainerroad.com/forum/u/rishim)\
**Post date:** [September 12, 2023, 5:51pm UTC](https://www.trainerroad.com/forum/t/power-meters-vs-kickr/86786/1 "2023-09-12T17:51:49Z")

</div>

I have a kickr c. 2016 and for a long time I used to use a single sided power meter (Garmin) for consistency. I was super happy with this and absolutely loved doing my tr sessions indoors

Earlier this year I got a new bike and along with that I got dual sided Garmin pedals. My old bike and single sided power meter were to remain as a turbo bike (also my new bike need the kit to be able to use it) Admittedly this year I have done the least amount of turbo work and done most of my tr sessions outside. My power has been great outside and has increased a bit through the year.

The handful of sessions I have done indoors have been awful. Sessions I would have easily done out side were so hard to the point I could not complete them indoors. I have tried putting the pedals on my old bike but still have the same issue.

I’m really hating training indoors atm the moment and not looking forward to the winter! 😩 interestingly, when I’ve used the kickr power and hooked up my power meter to my head unit for comparison the effort feels more like it does outside but of course the power reading from the Garmin power meters is lower… don’t know what to do for the best! Any suggestions or has anyone else experienced this?

Thanks In advance

---

<div class="post-metadata">

**Author:** ![TrekCentury](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/trekcentury/32/123801_2.png) [@TrekCentury](https://www.trainerroad.com/forum/u/TrekCentury)\
**Post date:** [September 12, 2023, 6:43pm UTC](https://www.trainerroad.com/forum/t/power-meters-vs-kickr/86786/2 "2023-09-12T18:43:24Z")

</div>

Just a thought  
When you went from inside to outside was the power meter reading with new pedals the same as it was inside with the single sided power meter?

---

<div class="post-metadata">

**Author:** ![rishim](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/rishim/32/12890_2.png) [@rishim](https://www.trainerroad.com/forum/u/rishim)\
**Post date:** [September 12, 2023, 7:07pm UTC](https://www.trainerroad.com/forum/t/power-meters-vs-kickr/86786/3 "2023-09-12T19:07:05Z")

</div>

Not 100% sure but it felt easier on the new bike for sure. But put that down to the massive difference in the bikes, ages, position, tech.

---

<div class="post-metadata">

**Author:** ![rishim](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/rishim/32/12890_2.png) [@rishim](https://www.trainerroad.com/forum/u/rishim)\
**Post date:** [September 12, 2023, 7:09pm UTC](https://www.trainerroad.com/forum/t/power-meters-vs-kickr/86786/4 "2023-09-12T19:09:12Z")

</div>

Also, put new pedals on the turbo bike and cannot replicate outdoor power

---

<div class="post-metadata">

**Author:** ![mcneese.chad](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/mcneese.chad/32/15056_2.png) [@mcneese.chad](https://www.trainerroad.com/forum/u/mcneese.chad)\
**Post date:** [September 12, 2023, 7:10pm UTC](https://www.trainerroad.com/forum/t/power-meters-vs-kickr/86786/5 "2023-09-12T19:10:46Z")

</div>

Some basic questions / double-checks:

- You have the correct crank length set for each set of power meter pedals?

- Did you properly torque the pedals for each use case?

- Do you regularly calibrate each pedal set before use?

As mentioned above, even if everything is perfect above, there can be enough leg imbalance for some riders to result in notable differences in reported power when comparing single-sided to double-sided power meters.

---

<div class="post-metadata">

**Author:** ![rishim](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/rishim/32/12890_2.png) [@rishim](https://www.trainerroad.com/forum/u/rishim)\
**Post date:** [September 12, 2023, 7:34pm UTC](https://www.trainerroad.com/forum/t/power-meters-vs-kickr/86786/6 "2023-09-12T19:34:07Z")

</div>

Thanks chad.  
Yes is the answer to all questions. 🤷‍♂️

---

<div class="post-metadata">

**Author:** ![mcneese.chad](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/mcneese.chad/32/15056_2.png) [@mcneese.chad](https://www.trainerroad.com/forum/u/mcneese.chad)\
**Post date:** [September 12, 2023, 7:43pm UTC](https://www.trainerroad.com/forum/t/power-meters-vs-kickr/86786/7 "2023-09-12T19:43:49Z")

</div>

If you really want to dive into this, you need to do a structured comparison with your trainer as the constant while testing each pedal set against it. Use comparison tools to see how each PM stacks up to the trainer, and you may have an understanding of what’s happening.

> [@\[FAQ\] Power Meter and Smart Trainer Comparison Tools](https://www.trainerroad.com/forum/t/faq-power-meter-and-smart-trainer-comparison-tools/41760):
>
> This is a post about the most common resources and processes to compare at power data from at least two different power measurement devices (such as a Power Meter and a Smart Trainer). DC Rainmaker Analyzer [[DCR Analyzer: How to for data file comparison] ](https://www.youtube.com/watch?v=-8pyOFgkr_Q)[[GPLama How To: Comparing Power Meters // Power Accuracy Testing // DCR Analyzer Tool] ](https://www.youtube.com/watch?v=JhheDLXRM7I)ZwiftPower Analysis Here is a similar tool and info on use based on the same concept: Golden Cheetah [Power Meter Data Comp…](https://youtu.be/K-6IbKY4NMc)

Short of that, some hack testing with one device connected to the trainer, other to each PM during the test may shed some quick light on the situation.

---

<div class="post-metadata">

**Author:** ![HLaB](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/hlab/32/60448_2.png) [@HLaB](https://www.trainerroad.com/forum/u/HLaB)\
**Post date:** [September 12, 2023, 7:45pm UTC](https://www.trainerroad.com/forum/t/power-meters-vs-kickr/86786/8 "2023-09-12T19:45:54Z")

</div>

What did you use to set your FTP? In theory I think you just have one FTP (you are one person regardless) but in practice with more natural air cooling, momentum etc power for most is easier achieved outside. If your FTP was set outdoors it could be a little too high indoors and pushing you over the edge.

---

<div class="post-metadata">

**Author:** ![AJS914](https://avatars.discourse-cdn.com/v4/letter/a/919ad9/32.png) [@AJS914](https://www.trainerroad.com/forum/u/AJS914)\
**Post date:** [September 12, 2023, 7:46pm UTC](https://www.trainerroad.com/forum/t/power-meters-vs-kickr/86786/9 "2023-09-12T19:46:17Z")

</div>

FWIW, I was searching around the other day and found this site that will compare .fit files for free:

> **[Compare and analyse bike power meter outputs for free](https://compare-the-watts.com/)**
>
> Analyse and compare cycling power meter data for the same activity in your browser, for FREE. Select multiple .fit files to compare the watts, see your power in each recording over time, delve into Left/Right data, check manufacturer accuracy...

Last time i did it, I did this complicated dance with Golden Cheetah and Excel.

---

<div class="post-metadata">

**Author:** ![mcneese.chad](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/mcneese.chad/32/15056_2.png) [@mcneese.chad](https://www.trainerroad.com/forum/u/mcneese.chad)\
**Post date:** [September 12, 2023, 10:23pm UTC](https://www.trainerroad.com/forum/t/power-meters-vs-kickr/86786/10 "2023-09-12T22:23:37Z")

</div>

Sweet, I will add that to my FAQ 😃

---

<div class="post-metadata">

**Author:** ![rishim](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/rishim/32/12890_2.png) [@rishim](https://www.trainerroad.com/forum/u/rishim)\
**Post date:** [September 13, 2023, 5:08am UTC](https://www.trainerroad.com/forum/t/power-meters-vs-kickr/86786/11 "2023-09-13T05:08:42Z")

</div>

Thanks all. Going to to do a bit more of a detailed comparison on the PM’s will feed back if it sheds some light on the situation. 🙏
