# Noob question about power meters.... on e-bikes

**URL:** <https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306>\
**Category:** Equipment\
**Tags:** power-meter\
**Created:** [October 6, 2023, 12:44pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306 "2023-10-06T12:44:59Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![AlexOrbea](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/alexorbea/32/85098_2.png) [@AlexOrbea](https://www.trainerroad.com/forum/u/AlexOrbea)\
**Post date:** [October 6, 2023, 12:44pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/1 "2023-10-06T12:44:59Z")

</div>

It seems pretty reasonable to assume that a pedal based power meter would work fine on an E-bike but has anyone ever tried/proved that crank arm power meters work on mid-motored e-bikes?

The reason I ask is that I have an emtb (that I cannot access the internal power/torque data) and I don’t want to clip in but I’d like to have a power meter as I often ride with my wife and it can be quite relaxed so I’d like to be able to maintain either Z2 or maybe even target certain power on the climbs etc.

I’m sure this seems a bit of an odd question but I couldn’t find anything on google about it. I’m a noob so I don’t fully understand how crank power meters work but I assume they can isolate the effort from the rider and motor.

I have a HRM and always use that, in case anyone suggests this as an alternative.

---

<div class="post-metadata">

**Author:** ![IdahoClimber](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/idahoclimber/32/137874_2.png) [@IdahoClimber](https://www.trainerroad.com/forum/u/IdahoClimber)\
**Post date:** [October 6, 2023, 1:16pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/2 "2023-10-06T13:16:46Z")

</div>

Alex - I did some research on this several months ago and found no data or experience with power meters on the web. I have a set of Assioma power meters on a road e-bike and a set of Garmin rally 200s on an e-mtb. I find the setups work very well for outside structured workouts, turning off or down the e-bike motor during intervals allows me not to blow up on some relatively steep climbing rides. It remains unclear how accurate these setups are because I have no way to compare the output being measured. The power output by me and the motor are reported separately on my Trek fuel exe LCD display but is wildly inaccurate c/w what is reported by the Garmin pedal meters. I could find no reported experiences with crank-based PMs and e-bikes. Hope this helps. - jke

---

<div class="post-metadata">

**Author:** ![AlexOrbea](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/alexorbea/32/85098_2.png) [@AlexOrbea](https://www.trainerroad.com/forum/u/AlexOrbea)\
**Post date:** [October 6, 2023, 1:54pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/3 "2023-10-06T13:54:50Z")

</div>

Thank you for the great feedback.

I’m semi tempted to buy a single sided crank arm (assuming I can find one to fit) and see if it will work but it would be nice to have confirmation first.

My emtb is primarily a trail bike and I’m not proficient enough to be clipped in.

---

<div class="post-metadata">

**Author:** ![CincoGirl](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/cincogirl/32/161915_2.png) [@CincoGirl](https://www.trainerroad.com/forum/u/CincoGirl)\
**Post date:** [October 6, 2023, 2:21pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/4 "2023-10-06T14:21:36Z")

</div>

Can’t see why pedal based and crank arm wouldn’t work. The motor applies power to the chainring “independent” of the crank arms.

---

<div class="post-metadata">

**Author:** ![mcneese.chad](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/mcneese.chad/32/15056_2.png) [@mcneese.chad](https://www.trainerroad.com/forum/u/mcneese.chad)\
**Post date:** [October 6, 2023, 2:24pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/5 "2023-10-06T14:24:26Z")

</div>

The physics of how a crank arm power meter works remain the same regardless of e-power added (mid or hub drive doesn’t make a difference).

- The power meter detects the deflection in the actual crank arm to calculate the force,
- Then it adds the RPM (velocity) to estimate the power (left side doubled).

So you will get the power data from the LS PM that is your actual power, regardless of e-bike assistance. Think of the e-bike assistance like a tail wind, that gives you more motion but the effort you put into the crank remains the same system, even if you get a “boost”.

---

<div class="post-metadata">

**Author:** ![Pbase](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/pbase/32/969_2.png) [@Pbase](https://www.trainerroad.com/forum/u/Pbase)\
**Post date:** [October 6, 2023, 2:34pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/6 "2023-10-06T14:34:26Z")

</div>

I have an eMTB that reports both total power and the power I am generating, so I don’t need power pedals, but having said that, if you’re just doing mostly Z2 rides, I would just use my HRM and save the money.

---

<div class="post-metadata">

**Author:** ![AlexOrbea](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/alexorbea/32/85098_2.png) [@AlexOrbea](https://www.trainerroad.com/forum/u/AlexOrbea)\
**Post date:** [October 6, 2023, 2:38pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/7 "2023-10-06T14:38:08Z")

</div>

Thanks, that was my very limited understanding but it made sense to me. I will see if I can find one that fits ok.

---

<div class="post-metadata">

**Author:** ![AlexOrbea](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/alexorbea/32/85098_2.png) [@AlexOrbea](https://www.trainerroad.com/forum/u/AlexOrbea)\
**Post date:** [October 6, 2023, 2:42pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/8 "2023-10-06T14:42:00Z")

</div>

We don’t necessarily do Z2 rides but waiting for the wife, and/or using the assist can mean that my HR drops out of the training zone. I could probably maintain a more consistent workout if I knew how much power I was using. Then of course we do some pretty serious climbs so I could use the power meter to stay in whatever zone I was targeting, whether that was VO2 or Zone 2.

Mostly I’m absolutely happy to use the HRM but I’d like to do some outside rides that I can record in TR.

Emtbs are so cool, they’re unreal.

---

<div class="post-metadata">

**Author:** ![AlexOrbea](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/alexorbea/32/85098_2.png) [@AlexOrbea](https://www.trainerroad.com/forum/u/AlexOrbea)\
**Post date:** [October 6, 2023, 3:11pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/9 "2023-10-06T15:11:45Z")

</div>

Unfortunately, it doesn’t look like there are power meter cranks available for EMTBs. Or at least no easy to find. even the 4iiii factory install isn’t compatible…

---

<div class="post-metadata">

**Author:** ![jmclirl](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/jmclirl/32/85136_2.png) [@jmclirl](https://www.trainerroad.com/forum/u/jmclirl)\
**Post date:** [October 6, 2023, 4:22pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/10 "2023-10-06T16:22:57Z")

</div>

Long shot here - and probably on the expensive side. I’m not overly familiar with eMTB drivetrains, but would it be possible to replace the left crank with something that **is** compatible with the 4iiii factory install? Not sure what motor you have, but as an example it looks like you can get a left FSA crank for a Bosch Performance Line motor, and 4iiii _do_ deal with FSA cranks.

---

<div class="post-metadata">

**Author:** ![Jolyzara](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/jolyzara/32/97333_2.png) [@Jolyzara](https://www.trainerroad.com/forum/u/Jolyzara)\
**Post date:** [October 6, 2023, 5:05pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/11 "2023-10-06T17:05:40Z")

</div>

> [@AlexOrbea](#):
>
> We don’t necessarily do Z2 rides but waiting for the wife, and/or using the assist can mean that my HR drops out of the training zone. I could probably maintain a more consistent workout if I knew how much power I was using. Then of course we do some pretty serious climbs so I could use the power meter to stay in whatever zone I was targeting, whether that was VO2 or Zone 2.
> 
> Mostly I’m absolutely happy to use the HRM but I’d like to do some outside rides that I can record in TR.
> 
> Emtbs are so cool, they’re unreal.

You are riding an e-bike and ditch the wife out on the trail? 😬

---

<div class="post-metadata">

**Author:** ![Un-QuittingBikes](https://avatars.discourse-cdn.com/v4/letter/u/bb73d2/32.png) [@Un-QuittingBikes](https://www.trainerroad.com/forum/u/Un-QuittingBikes)\
**Post date:** [October 6, 2023, 5:15pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/12 "2023-10-06T17:15:40Z")

</div>

> [@Jolyzara](#):
>
> You are riding an e-bike and ditch the wife out on the trail? 😬

That’s one way to score victories.

Fitness can’t be great if he’s always sleeping on the couch though…

---

<div class="post-metadata">

**Author:** ![Un-QuittingBikes](https://avatars.discourse-cdn.com/v4/letter/u/bb73d2/32.png) [@Un-QuittingBikes](https://www.trainerroad.com/forum/u/Un-QuittingBikes)\
**Post date:** [October 6, 2023, 5:18pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/13 "2023-10-06T17:18:48Z")

</div>

> [@AlexOrbea](#):
>
> We don’t necessarily do Z2 rides but waiting for the wife, and/or using the assist can mean that my HR drops out of the training zone.

Z2 training is meant to be continuous, i.e. no breaks.

I don’t think you’re going to achieve what you think you’re going to achieve, in this case.

---

<div class="post-metadata">

**Author:** ![jkoch1](https://avatars.discourse-cdn.com/v4/letter/j/e36b37/32.png) [@jkoch1](https://www.trainerroad.com/forum/u/jkoch1)\
**Post date:** [October 6, 2023, 5:26pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/14 "2023-10-06T17:26:35Z")

</div>

SRM makes flat pedal based power meters, pricey though

---

<div class="post-metadata">

**Author:** ![AlexOrbea](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/alexorbea/32/85098_2.png) [@AlexOrbea](https://www.trainerroad.com/forum/u/AlexOrbea)\
**Post date:** [October 6, 2023, 6:16pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/15 "2023-10-06T18:16:35Z")

</div>

Only on the descents and the climbs…

---

<div class="post-metadata">

**Author:** ![AlexOrbea](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/alexorbea/32/85098_2.png) [@AlexOrbea](https://www.trainerroad.com/forum/u/AlexOrbea)\
**Post date:** [October 6, 2023, 6:18pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/16 "2023-10-06T18:18:20Z")

</div>

That’s the point though, having power means I can change the assist and gearing to keep it nice and constant, which is almost impossible on normal MTB riding. Also it means doing the same on the climbs to do intervals.

Plus… gadget…

---

<div class="post-metadata">

**Author:** ![Un-QuittingBikes](https://avatars.discourse-cdn.com/v4/letter/u/bb73d2/32.png) [@Un-QuittingBikes](https://www.trainerroad.com/forum/u/Un-QuittingBikes)\
**Post date:** [October 6, 2023, 6:48pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/17 "2023-10-06T18:48:59Z")

</div>

In that case, just get some Asiomas and a platform pedal adapter.

---

<div class="post-metadata">

**Author:** ![Joe](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/joe/32/11680_2.png) [@Joe](https://www.trainerroad.com/forum/u/Joe)\
**Post date:** [October 7, 2023, 2:34am UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/18 "2023-10-07T02:34:29Z")

</div>

> [@jkoch1](#):
>
> SRM makes flat pedal based power meters, pricey though

Hey, thanks!

> **[X-Power Flat Pedals | SRM Shop USA](https://onlineshop.srm.de/usa/shop/pedal-powermeter/x-power-flat-pedals/)**

Joe

---

<div class="post-metadata">

**Author:** ![Denitark](https://avatars.discourse-cdn.com/v4/letter/d/838e76/32.png) [@Denitark](https://www.trainerroad.com/forum/u/Denitark)\
**Post date:** [October 21, 2025, 5:11pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/19 "2025-10-21T17:11:55Z")

</div>

Pedal-based meters do generally work fine with most mid-drive systems, but crank-arm units can be trickier since the [electric trike](https://viribusbikes.com/collections/electric-tricycle) or eMTB motor often adds torque at the crank. That means readings may overestimate rider output because they combine leg effort and motor assist. Some riders use pedal sensors instead since they’re isolated from the drive system’s torque input.

---

<div class="post-metadata">

**Author:** ![McFly](https://avatars.discourse-cdn.com/v4/letter/m/b4bc9f/32.png) [@McFly](https://www.trainerroad.com/forum/u/McFly)\
**Post date:** [October 22, 2025, 2:56pm UTC](https://www.trainerroad.com/forum/t/noob-question-about-power-meters-on-e-bikes/87306/21 "2025-10-22T14:56:29Z")

</div>

So a custom integrated system with pedal PM and e-bike assist…

Set your workout targets for power at the pedals, and then have a cruise control for the speed. Let the system keep your speed within a range while the bike is in essentially ERG mode for the rider.

That could be fun.
