# New to MTB - flat pedals?

**URL:** <https://www.trainerroad.com/forum/t/new-to-mtb-flat-pedals/19736>\
**Category:** Equipment\
**Created:** [August 17, 2019, 1:36am UTC](https://www.trainerroad.com/forum/t/new-to-mtb-flat-pedals/19736 "2019-08-17T01:36:16Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![AldridgePrior](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/aldridgeprior/32/139066_2.png) [@AldridgePrior](https://www.trainerroad.com/forum/u/AldridgePrior)\
**Post date:** [October 29, 2020, 11:24am UTC](https://www.trainerroad.com/forum/t/new-to-mtb-flat-pedals/19736/12 "2020-10-29T11:24:10Z")

</div>

Old thread resurrected…

I’m still riding the hybrid “thing” I mentioned in this thread, with sections on the rough/steep trails I described:

> [@Combined MTB/Gravel-ish bike? - input welcomed!](https://www.trainerroad.com/forum/t/combined-mtb-gravel-ish-bike-input-welcomed/43887):
>
> I’d appreciate input from you good folks on the following, as a bit of a sanity check… grin I’m looking for a style of bike - a compromise bike - capable of being ridden satisfactorily on the off-road stuff near to me, plus a few tarmac lanes linking up the off-road stuff. Now, I’m in the UK’s peak district, and this off-road stuff ranges from manicured cycle trails along disused railway lines, easy canal towpaths through to so-called bridleways. These bridleways vary, but they often can be …

I’ve been using some Crank Brothers Double Shot pedals that I had - clips on one side, flat on the other - but they’ve not been ideal for this usage. Being under-geared and under-tractioned on the bike, stall outs are not uncommon, and I suspect it’d be a lot easier/enjoyable/safer(!) if I could dab a foot down more quickly than having to rapidly unclip (& sometimes fail and tumble over…). Indeed, this “fear” of stall-outs and tumbles has prevented me attacking some sections and often has me just baling out earlier as a precaution, which isn’t ideal.

As a result I decided to change the pedal/shoe combo and move to flats: I’ve bought some Five Ten Trailcross shoes for this hike-a-biking, and ordered some some HT PA03A flat pedals to use with them.

I know next to nothing about off-road/MTB, but from when I rode bikes as a kid and other stuff I’ve read now, I’m assuming I’ll end up using much more of a mid-foot position with flat pedals than I would’ve done when clipped in.

So, once I fit these flat pedals, (and depending on their platform height vs. the old Crank Brother pedals), am I likely to need to reduce the seat height a bit to accommodate using more of a mid-foot pedal position much of the time? Or what?

---

_[View the full topic](https://www.trainerroad.com/forum/t/new-to-mtb-flat-pedals/19736)._
