# Kickr Snap Lost Resistance

**URL:** <https://www.trainerroad.com/forum/t/kickr-snap-lost-resistance/23328>\
**Category:** Equipment\
**Tags:** trainer\
**Created:** [October 31, 2019, 2:21pm UTC](https://www.trainerroad.com/forum/t/kickr-snap-lost-resistance/23328 "2019-10-31T14:21:03Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![jasonpedersen](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/jasonpedersen/32/12429_2.png) [@jasonpedersen](https://www.trainerroad.com/forum/u/jasonpedersen)\
**Post date:** [October 31, 2019, 2:21pm UTC](https://www.trainerroad.com/forum/t/kickr-snap-lost-resistance/23328/1 "2019-10-31T14:21:03Z")

</div>

This morning after completing Geiger -5 as prescribed, I decided to tack on a few extra minutes in “standard” mode to get in a sprint or two. About 20 seconds into a 30 second effort around 500 W, I heard what I thought was my tire going flat. You know that dreaded “psst” sound. Just as I was getting to the end of the effort, the resistance dropped to basically zero. I started coasting and, to my surprise, the wheel just kept spinning. I manually slowed the wheel down and then I realized my tire was not flat at all, and the reason I had trouble stopping the wheel was due to the flywheel inertia. I noted the trainer was warm, but I don’t think any warmer than what I typically see after doing some longer, sustained efforts. (2x12 @ ~300 W in this case). I put the trainer back in erg mode and started spinning again, and it was struggling to hold 50 W (target power was 136 W at that point).

I had to hop off the trainer and get ready for work, so I wasn’t able to look into this more, but I’m afraid I just broke my trainer! Has anyone ever had a similar experience with their Wahoo Kickr Snap?

Here’s my ride file: [https://www.trainerroad.com/career/jpbjorn/rides/65217679-geiger-5](https://www.trainerroad.com/career/jpbjorn/rides/65217679-geiger-5)

Thanks!

---

<div class="post-metadata">

**Author:** ![jasonpedersen](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/jasonpedersen/32/12429_2.png) [@jasonpedersen](https://www.trainerroad.com/forum/u/jasonpedersen)\
**Post date:** [November 1, 2019, 2:54pm UTC](https://www.trainerroad.com/forum/t/kickr-snap-lost-resistance/23328/2 "2019-11-01T14:54:42Z")

</div>

Finally got a minute to check things out more thoroughly. I updated the firmware. No improvement. Then I tried a spin down calibration, and it wouldn’t show any speed (ie 0.0 mph). So then I figured it was the optical sensor. After disassembling the unit I found the optical “mirror” sticker was gone! So the noise I heard that I thought was my tire deflating was the optical sticker peeling off and running for a moment.

Going to get some new tape which should fix the issue. I will post an update when it’s working so anyone searching the forum in the future with the same issue can find this.

 ![image](https://global.discourse-cdn.com/trainerroad/original/3X/3/9/3906c09bcbd49d5aa79760ec874fc1725bf18aaa.jpeg)

---

<div class="post-metadata">

**Author:** ![jasonpedersen](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/jasonpedersen/32/12429_2.png) [@jasonpedersen](https://www.trainerroad.com/forum/u/jasonpedersen)\
**Post date:** [November 1, 2019, 5:31pm UTC](https://www.trainerroad.com/forum/t/kickr-snap-lost-resistance/23328/3 "2019-11-01T17:31:04Z")

</div>

Looks like it worked! Speed is reading now thanks to some new tape. I will probably give it a real test during my toddler’s nap time today. Hopefully the tape stays put 🤞

 ![image](https://global.discourse-cdn.com/trainerroad/original/3X/6/2/628ecbd667cb2ab73379b3eddd21eec2a04f94f4.jpeg) ![image](https://global.discourse-cdn.com/trainerroad/original/3X/1/f/1f666dbc5e7f726316e52ae2275f24182f028479.jpeg)

---

<div class="post-metadata">

**Author:** ![jasonpedersen](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/jasonpedersen/32/12429_2.png) [@jasonpedersen](https://www.trainerroad.com/forum/u/jasonpedersen)\
**Post date:** [November 1, 2019, 10:50pm UTC](https://www.trainerroad.com/forum/t/kickr-snap-lost-resistance/23328/4 "2019-11-01T22:50:37Z")

</div>

It worked! 🙂 [https://www.trainerroad.com/career/jpbjorn/rides/65329275-winchell](https://www.trainerroad.com/career/jpbjorn/rides/65329275-winchell)

---

<div class="post-metadata">

**Author:** ![alvaroe16](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/alvaroe16/32/23917_2.png) [@alvaroe16](https://www.trainerroad.com/forum/u/alvaroe16)\
**Post date:** [November 1, 2019, 11:19pm UTC](https://www.trainerroad.com/forum/t/kickr-snap-lost-resistance/23328/5 "2019-11-01T23:19:46Z")

</div>

Nice fix! good to know and keep on mind if this happens to mine…

---

<div class="post-metadata">

**Author:** ![Joey\_R](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/joey_r/32/7725_2.png) [@Joey\_R](https://www.trainerroad.com/forum/u/Joey_R)\
**Post date:** [February 10, 2023, 4:51pm UTC](https://www.trainerroad.com/forum/t/kickr-snap-lost-resistance/23328/6 "2023-02-10T16:51:16Z")

</div>

I know this is a three year old post but I just wanted to say thanks! You saved me from buying a new trainer. I heard a pop and was sure the capacitor blew or there was some mechanical failure. I threw some foil tape in there and works great now!

---

<div class="post-metadata">

**Author:** ![jasonpedersen](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/jasonpedersen/32/12429_2.png) [@jasonpedersen](https://www.trainerroad.com/forum/u/jasonpedersen)\
**Post date:** [February 10, 2023, 6:34pm UTC](https://www.trainerroad.com/forum/t/kickr-snap-lost-resistance/23328/7 "2023-02-10T18:34:12Z")

</div>

Awesome, glad it was useful!

Looking at this ride file I posted back then… man I was FIT! Have another kids since then, too! Haha
