# Goo Gone on Carbon Rims

**URL:** <https://www.trainerroad.com/forum/t/goo-gone-on-carbon-rims/84411>\
**Category:** Equipment\
**Created:** [June 10, 2023, 6:09pm UTC](https://www.trainerroad.com/forum/t/goo-gone-on-carbon-rims/84411 "2023-06-10T18:09:50Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dwells329](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/dwells329/32/12895_2.png) [@Dwells329](https://www.trainerroad.com/forum/u/Dwells329)\
**Post date:** [June 10, 2023, 6:09pm UTC](https://www.trainerroad.com/forum/t/goo-gone-on-carbon-rims/84411/1 "2023-06-10T18:09:50Z")

</div>

I got a set of Roval carbon rims and I couldn’t get the stickers off cleanly. Can I use goo gone to remove the residue or should I find a different way?

---

<div class="post-metadata">

**Author:** ![WombleHunter](https://avatars.discourse-cdn.com/v4/letter/w/9de053/32.png) [@WombleHunter](https://www.trainerroad.com/forum/u/WombleHunter)\
**Post date:** [June 10, 2023, 6:20pm UTC](https://www.trainerroad.com/forum/t/goo-gone-on-carbon-rims/84411/2 "2023-06-10T18:20:45Z")

</div>

hair dryer on low heat is the best way that I’ve found, if you do it before you remove the sticker the whole thing usually comes of in one go, used the same trick on tubeless rim tape today

(melts the glue so that it easy to remove / comes off with the sticker)