# Garmin Edge Can Pause, FFWD and RWD outdoor workouts **URL:** \ **Category:** Training\ **Created:** [April 2, 2022, 4:27pm UTC](https://www.trainerroad.com/forum/t/garmin-edge-can-pause-ffwd-and-rwd-outdoor-workouts/71260 "2022-04-02T16:27:16Z")\ **Posts on this page:** 1\ **Showing post:** 19
**Author:** ![WindWarrior](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/windwarrior/32/84679_2.png) [@WindWarrior](https://www.trainerroad.com/forum/u/WindWarrior)\ **Post date:** [August 4, 2022, 6:11pm UTC](https://www.trainerroad.com/forum/t/garmin-edge-can-pause-ffwd-and-rwd-outdoor-workouts/71260/19 "2022-08-04T18:11:40Z")
I’d never use the green/yellow/red with average lap power, its counterproductive for the reason you pointed out. I don’t agree with TR decision to use lap average power with Garmin default workout comparison/graph stuff. An old feature request I made: > [@Feature request - 3s power on Garmin default workout page](https://www.trainerroad.com/forum/t/feature-request-3s-power-on-garmin-default-workout-page/59864): > > Currently the TrainerRoad outside workout .FIT file defines lap power as the target type for the Garmin default workout page. Here is an example, where lap power is “Step Avg. Pwr.” at the top of the screen: [74] This is not very useful, and workouts from Garmin Connect and TrainingPeaks use 3-sec Power as shown here: [Default Workout Comparison z2] The FIT File SDK defines many types of targets: Where TR is using POWER\_LAP. My enhancement request is for TrainerRoad to use POWER\_… --- _[View the full topic](https://www.trainerroad.com/forum/t/garmin-edge-can-pause-ffwd-and-rwd-outdoor-workouts/71260)._