# Feature request: Integrate Vector 3 pedal info (L/R etc.) into the Trainer Road recording please **URL:** \ **Category:** TrainerRoad Software\ **Tags:** feature-request\ **Created:** [December 17, 2018, 10:43am UTC](https://www.trainerroad.com/forum/t/feature-request-integrate-vector-3-pedal-info-l-r-etc-into-the-trainer-road-recording-please/8049 "2018-12-17T10:43:24Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![PhilSJones](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/philsjones/32/5495_2.png) [@PhilSJones](https://www.trainerroad.com/forum/u/PhilSJones)\ **Post date:** [December 17, 2018, 10:43am UTC](https://www.trainerroad.com/forum/t/feature-request-integrate-vector-3-pedal-info-l-r-etc-into-the-trainer-road-recording-please/8049/1 "2018-12-17T10:43:24Z")
I might be asking a lot here, but here is my situation. I have a bit of a weakness with my right hip flexor I am trying to correct. It shows up especially when I drop down into a TT position. So I tend to run both the Kickr trainer AND my Vector 3 pedals when doing a TR Turbo session. (Not only for power match as my Kickr is off slightly) but so I have a view of my pedalling dynamics and L/R balance I record the V3s on my garmin watch. Trainer Road uploads to garmin connect as well, directly. So I end up with two files. 1. the one from TR with intervals, the desired power lines and what i was actually hitting (from the V3 recording). 2. A second one, straight from the garmin device, with the pedal dynamics and L/R data., but no TR intervals or line I am trying to match. However I only get it for a particular interval if I press the lap button, and that is a faff, especially on something like Gendarme. Given i will often try to go intervals in a low position, on the drops or on the TT bars, at the moment I have to make a note of when I press the garmin to see how that corresponds to the sesions in the TR segment. I then have to copy from one to the other a note of left right effectiveness. (or hold a duplicate file in Garmin connect which makes it look as if I have done teh session twice). So i would really love to be able to see teh garmin pedal dynamics in TR. (However I suspect there is a copyright thing running here which would be a shame). Cheers ---
**Author:** ![DuncanM23](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/duncanm23/32/2359_2.png) [@DuncanM23](https://www.trainerroad.com/forum/u/DuncanM23)\ **Post date:** [December 17, 2018, 10:49am UTC](https://www.trainerroad.com/forum/t/feature-request-integrate-vector-3-pedal-info-l-r-etc-into-the-trainer-road-recording-please/8049/2 "2018-12-17T10:49:21Z")
Just the left/right power would be useful (like you I have an issue on my right side, but I have P1 pedals). I think this has been asked before, and Nate has essentially said that as there would be no benefit in terms of TR planning/analysis for the majority of people with dual sided power (and that’s definitely not the majority of TR users), it’s very low on the priority list. ---
**Author:** ![PhilSJones](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/philsjones/32/5495_2.png) [@PhilSJones](https://www.trainerroad.com/forum/u/PhilSJones)\ **Post date:** [December 17, 2018, 11:20am UTC](https://www.trainerroad.com/forum/t/feature-request-integrate-vector-3-pedal-info-l-r-etc-into-the-trainer-road-recording-please/8049/3 "2018-12-17T11:20:41Z")
As the issue for me is at particular powers and positions, having L/R power balance _per interval_ would be sufficient for me.