# Exclude interval from records (feature request) **URL:** \ **Category:** TrainerRoad Software\ **Tags:** feature-request\ **Created:** [March 24, 2019, 7:51pm UTC](https://www.trainerroad.com/forum/t/exclude-interval-from-records-feature-request/13765 "2019-03-24T19:51:45Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![philrcook](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/philrcook/32/15797_2.png) [@philrcook](https://www.trainerroad.com/forum/u/philrcook)\ **Post date:** [March 24, 2019, 7:51pm UTC](https://www.trainerroad.com/forum/t/exclude-interval-from-records-feature-request/13765/1 "2019-03-24T19:51:45Z")
Rather than exclude a whole workout from records is it possible to just exclude an interval? Todays workout seemed to have a bad PM calibration so I recalibrated half way through. I created an interval for both parts of workout and wondered if rather than exclude whole workout from records can I just exclude one interval? Is it also possible to see a power curve for an interval rather than a whole workout? If not, could these be included in any upcoming updates? ---
**Author:** ![Bryce](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/bryce/32/72_2.png) [@Bryce](https://www.trainerroad.com/forum/u/Bryce)\ **Post date:** [March 25, 2019, 5:28am UTC](https://www.trainerroad.com/forum/t/exclude-interval-from-records-feature-request/13765/2 "2019-03-25T05:28:56Z")
> [@philrcook](#): > > Rather than exclude a whole workout from records is it possible to just exclude an interval? This is not possible at this time šŸ˜”. That being said, I think this could be a useful improvement, so I will share it with the team for future consideration šŸ‘ > [@philrcook](#): > > Is it also possible to see a power curve for an interval rather than a whole workout? This is also not possible, but could you elaborate what information you are looking to gather from this type of Power Curve? Most intervals are a constant power level, so a power curve for a specific interval would just be completely flat for the duration of the interval. For example, if the Target Power was 300 watts for 5 minutes, then the power curve would just be a flat 300 watts for 5 minutes, after which it would drop to zero. Thanks again for the suggestions, we are always looking to learn and improve based on user feedback šŸ™‚ ---
**Author:** ![nju001](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/nju001/32/16548_2.png) [@nju001](https://www.trainerroad.com/forum/u/nju001)\ **Post date:** [March 25, 2019, 8:49am UTC](https://www.trainerroad.com/forum/t/exclude-interval-from-records-feature-request/13765/3 "2019-03-25T08:49:56Z")
It is possible to delete the first part of a ride in Strava; Iā€™ve done it. (I have a Strava subscription, so I donā€™t know if you can do this without a subscription.) Once you have done that, you can export the data from Strava, delete your ride in TrainerRoad and re-import the Strava data. This is the best solution Iā€™ve found so far. Further disclaimer: I know the Strava editing works for outside rides, but it may not work for trainer/turbo rides. ---
**Author:** ![philrcook](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/philrcook/32/15797_2.png) [@philrcook](https://www.trainerroad.com/forum/u/philrcook)\ **Post date:** [March 25, 2019, 10:47am UTC](https://www.trainerroad.com/forum/t/exclude-interval-from-records-feature-request/13765/4 "2019-03-25T10:47:30Z")
Hi Bryce, thanks for the reply. Perhaps interval wasnā€™t the best wording in regards to the power curve query but itā€™s what itā€™s called when you manually create an ā€˜intervalā€™ based on a portion of a ride. So for example if youā€™ve taken part in a multi lap race you might create an ā€˜intervalā€™ for each lap. Being able to see a power curve just for each lap could be useful. In my instance, I was just wanting to see a power curve for the portion of my ride where my PM was properly calibrated. Hope this makes sense? ---
**Author:** ![Bryce](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/bryce/32/72_2.png) [@Bryce](https://www.trainerroad.com/forum/u/Bryce)\ **Post date:** [March 25, 2019, 3:49pm UTC](https://www.trainerroad.com/forum/t/exclude-interval-from-records-feature-request/13765/5 "2019-03-25T15:49:10Z")
Ah that does make more sense. I like the concept of being able to compare multiple laps šŸ‘ Iā€™ll pass this onto the team as well šŸ’„ ---
**Author:** ![philrcook](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/philrcook/32/15797_2.png) [@philrcook](https://www.trainerroad.com/forum/u/philrcook)\ **Post date:** [March 25, 2019, 4:27pm UTC](https://www.trainerroad.com/forum/t/exclude-interval-from-records-feature-request/13765/6 "2019-03-25T16:27:35Z")
Thanks @Bryce