# Continental GP 5000S TR leaking air

**URL:** <https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418>\
**Category:** Equipment\
**Tags:** tires\
**Created:** [May 1, 2023, 10:58am UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418 "2023-05-01T10:58:31Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![Benjamin\_Reynolds](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/benjamin_reynolds/32/20651_2.png) [@Benjamin\_Reynolds](https://www.trainerroad.com/forum/u/Benjamin_Reynolds)\
**Post date:** [May 1, 2023, 3:45pm UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/21 "2023-05-01T15:45:17Z")

</div>

> [@splash](#):
>
> I’ll probably top up another 30ml a couple of weeks later.

I do this on new tires as well.

On tubeless setups, it’s definitely best practice to keep an eye on how much sealant is left in the tires.

With a road tire, I don’t really see any need for more than 30ml of sealant at a time, but I certainly don’t let it dry up either. The only reason I would need more than 30ml is if I got multiple flats on a single ride.

It’s easy enough to pull the valve cores while I’m cleaning my bike and just check the fluid level, there’s really not any excuse for letting it run low.

Of course, this all is complication over just running tubes. So I totally understand why some folks swear off tubeless. I’m sometimes not even convinced it’s worthwhile on the road.

---

<div class="post-metadata">

**Author:** ![AlistairSH](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/alistairsh/32/129683_2.png) [@AlistairSH](https://www.trainerroad.com/forum/u/AlistairSH)\
**Post date:** [May 1, 2023, 3:55pm UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/22 "2023-05-01T15:55:01Z")

</div>

Sounds like a flaw in the tire to me. They shouldn’t bubble sealant out the whole sidewall. Like I said above, I’ve only had two tires do that (same brand/model, bought at same time), and both ended up being returned. At most, I get a small number of bubbles on the sidewall that seal off immediately.

Tires used recently… Vittoria, Bontrager, Maxxis, and Continental. None leaked from the sidewall like you desecribe.

---

<div class="post-metadata">

**Author:** ![HLaB](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/hlab/32/60448_2.png) [@HLaB](https://www.trainerroad.com/forum/u/HLaB)\
**Post date:** [May 1, 2023, 3:55pm UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/23 "2023-05-01T15:55:51Z")

</div>

If its not the tape or valve, the rim needs to be completely clean IME. Annoyingly I hit a pothole in a paceline a few weeks back and it unseated, a CO2 cannister never re-seated it but cleaning the rim/tyre with some soapy Muc Off bike cleaner allowed my 5000TR to seat instantly with a track pump and its not lost any significant air since. I had originally planned to use the muc off to identify the leak point, which it did but it also solved it.

In the past though I’ve had to take a tyre completely off the rim, clean the rim and reinstall.

---

<div class="post-metadata">

**Author:** ![Rizzi](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/rizzi/32/17674_2.png) [@Rizzi](https://www.trainerroad.com/forum/u/Rizzi)\
**Post date:** [May 1, 2023, 4:26pm UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/24 "2023-05-01T16:26:48Z")

</div>

> [@alex\_smallet](#):
>
> I did this. The bubbles come all over the sidewall. They are leaking slowly, so no sound is heard, but it’s all over the side.

Have a look:

> [@GP5000 sidewall leak](https://www.trainerroad.com/forum/t/gp5000-sidewall-leak/36264):
>
> Any reason why this would be normal? Mounted up, no sealant to start, went around the block and this is what I found.

---

<div class="post-metadata">

**Author:** ![AJS914](https://avatars.discourse-cdn.com/v4/letter/a/919ad9/32.png) [@AJS914](https://www.trainerroad.com/forum/u/AJS914)\
**Post date:** [May 1, 2023, 5:06pm UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/25 "2023-05-01T17:06:17Z")

</div>

> [@alex\_smallet](#):
>
> The manual says I only need 30 ml of sealant. I added a little more.

> [@Benjamin\_Reynolds](#):
>
> I used 30ml of Orange Seal. I’ve always thought this is fairly normal for tubeless setups though.

> [@splash](#):
>
> I use at least 50ml, and if it’s a new tyre, I’ll probably top up another 30ml a couple of weeks later.

I’m heavy handed with the Orange Seal. I’ll start with 60ml. I don’t see any downside and I don’t care about the extra weight.

With the 5000TL though, the sealant lasted a long time because of the inner butyl layer on the tire. I’m guessing that with the new tire, sealant will go faster because the tire is more porous.

---

<div class="post-metadata">

**Author:** ![kervelo](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/kervelo/32/143552_2.png) [@kervelo](https://www.trainerroad.com/forum/u/kervelo)\
**Post date:** [May 1, 2023, 6:47pm UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/26 "2023-05-01T18:47:36Z")

</div>

Orange seal recommends 30 to 60 ml (1 to 2 oz) for a road tyre. I have always used 60 ml and so far no leaks.

---

<div class="post-metadata">

**Author:** ![alex\_smallet](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/alex_smallet/32/60466_2.png) [@alex\_smallet](https://www.trainerroad.com/forum/u/alex_smallet)\
**Post date:** [May 1, 2023, 7:13pm UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/27 "2023-05-01T19:13:32Z")

</div>

> [@AlistairSH](#):
>
> They shouldn’t bubble sealant out the whole sidewall.

I am sorry about misunderstanding. It’s not sealant, it’s air that bubbles out when I put the tire in the water. I will make a video tomorrow. Today I was riding again and lost half the air in about three hours - from 70 psi to 35 psi.

---

<div class="post-metadata">

**Author:** ![kevistraining](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/kevistraining/32/171237_2.png) [@kevistraining](https://www.trainerroad.com/forum/u/kevistraining)\
**Post date:** [May 1, 2023, 8:13pm UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/28 "2023-05-01T20:13:58Z")

</div>

> [@alex\_smallet](#):
>
> I used Continental Revo Sealant

👆 No no no no… No.

Treat yourself to some orange seal.

---

<div class="post-metadata">

**Author:** ![AlistairSH](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/alistairsh/32/129683_2.png) [@AlistairSH](https://www.trainerroad.com/forum/u/AlistairSH)\
**Post date:** [May 1, 2023, 8:27pm UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/29 "2023-05-01T20:27:54Z")

</div>

Ah, gotcha. I’d add a bit more sealant (maybe mix in some glitter) and see if that helps. If not, take’em back to the shop.

---

<div class="post-metadata">

**Author:** ![jfranci3](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/jfranci3/32/12908_2.png) [@jfranci3](https://www.trainerroad.com/forum/u/jfranci3)\
**Post date:** [May 1, 2023, 9:03pm UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/30 "2023-05-01T21:03:33Z")

</div>

Muc Off is like throwing a little party for yourself in your garage.

A good reason for not using Orange for the first fill is that is tints your tire orange. Buy the color that matches your bike.  
Reserve = Blue  
Orange = Orange  
Pirelli = yellow  
WTB = brown

---

<div class="post-metadata">

**Author:** ![alex\_smallet](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/alex_smallet/32/60466_2.png) [@alex\_smallet](https://www.trainerroad.com/forum/u/alex_smallet)\
**Post date:** [May 2, 2023, 8:50am UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/31 "2023-05-02T08:50:09Z")

</div>

Here is the video of the sidewall leaking air. This is not sealant, it’s just air bubbles. The tire is pumped to max pressure - 73 psi.

[![](https://global.discourse-cdn.com/trainerroad/original/3X/8/4/84fc516ed6a3cd453d47ded908e4c01f6f5cb4fa.jpeg "Conti 5000S TR") ](https://www.youtube.com/watch?v=QMPMVsQZZws)

---

<div class="post-metadata">

**Author:** ![alexfthenakis](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/alexfthenakis/32/115632_2.png) [@alexfthenakis](https://www.trainerroad.com/forum/u/alexfthenakis)\
**Post date:** [May 2, 2023, 8:58am UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/32 "2023-05-02T08:58:11Z")

</div>

Yeah sealant will take care of that eventually, but as others have said it might take a few rides and you might have to top it up a few times as the first doses of sealant may get fully absorbed into the pores.

---

<div class="post-metadata">

**Author:** ![russell.r.sage](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/russell.r.sage/32/36157_2.png) [@russell.r.sage](https://www.trainerroad.com/forum/u/russell.r.sage)\
**Post date:** [May 2, 2023, 12:41pm UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/33 "2023-05-02T12:41:44Z")

</div>

I’ve always set my wheels over a bucket or something that allows them to rest horizontally for a bit and then flip over to do the other side. Might not be necessary, but I think it helps the sealant absorb into the side walls faster.

---

<div class="post-metadata">

**Author:** ![FrankTuna](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/franktuna/32/135629_2.png) [@FrankTuna](https://www.trainerroad.com/forum/u/FrankTuna)\
**Post date:** [May 2, 2023, 12:45pm UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/34 "2023-05-02T12:45:25Z")

</div>

It also helps to do the tubeless tire dance!

[https://www.google.com/url?sa=t&source=web&rct=j&url=https://m.facebook.com/nohobike/videos/the-dance-of-the-tubeless-tire-to-push-the-sealant-into-the-bead-hook/271149700242275/&ved=2ahUKEwj4\_ovd1Nb-AhUNEFkFHVvuCqIQtwJ6BAgIEAI&usg=AOvVaw3jFQ\_2cLjR2M\_z3NZxT2aH](https://www.google.com/url?sa=t&source=web&rct=j&url=https://m.facebook.com/nohobike/videos/the-dance-of-the-tubeless-tire-to-push-the-sealant-into-the-bead-hook/271149700242275/&ved=2ahUKEwj4_ovd1Nb-AhUNEFkFHVvuCqIQtwJ6BAgIEAI&usg=AOvVaw3jFQ_2cLjR2M_z3NZxT2aH)

It looks silly of course but I swear it helps.

---

<div class="post-metadata">

**Author:** ![Abe\_Froman](https://avatars.discourse-cdn.com/v4/letter/a/e99b99/32.png) [@Abe\_Froman](https://www.trainerroad.com/forum/u/Abe_Froman)\
**Post date:** [May 2, 2023, 12:53pm UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/35 "2023-05-02T12:53:49Z")

</div>

Haha yup. I do something similar but grab the wheel by the hub and give it a good spin first.

Another anecdotal experience here…when I mounted up my gravel tires a couple weeks ago, as soon as I pumped them up and seated the bead, big, steady hiss of air. Did the tubeless dance, hiss went away in less than 3 seconds, and they’ve been fine since.

---

<div class="post-metadata">

**Author:** ![alex\_smallet](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/alex_smallet/32/60466_2.png) [@alex\_smallet](https://www.trainerroad.com/forum/u/alex_smallet)\
**Post date:** [May 2, 2023, 12:56pm UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/36 "2023-05-02T12:56:45Z")

</div>

I certainly do this every time with both sides. With this tire it does not help.

---

<div class="post-metadata">

**Author:** ![AJS914](https://avatars.discourse-cdn.com/v4/letter/a/919ad9/32.png) [@AJS914](https://www.trainerroad.com/forum/u/AJS914)\
**Post date:** [May 2, 2023, 10:10pm UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/37 "2023-05-02T22:10:08Z")

</div>

I’ve had tires with porous sidewalls that never stopped weeping. I wonder if scrubbing the inside of the tire with soap and water first would help. Sometimes there is a slick film of something on the inside of tires. I wonder if it prevents adhesion?

I also read one time where team EF was pre-treating the inside of their tires with a coating of sealant (painting it on). Something like that might allow the sealant to dry nicely on the inside of the tire.

---

<div class="post-metadata">

**Author:** ![sryke](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/sryke/32/72539_2.png) [@sryke](https://www.trainerroad.com/forum/u/sryke)\
**Post date:** [May 2, 2023, 11:00pm UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/38 "2023-05-02T23:00:01Z")

</div>

TRs should not leak like this. I haven’t observed any unusual air loss with several of them.

Tip from the old days when there was no tubeless Race King. With sealant in the tire ride with minimal air pressure several times around the block. Minimal air pressure! Sidewalls will stretch and open up for the sealant. A little more sealant can help.

---

<div class="post-metadata">

**Author:** ![jfranci3](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/jfranci3/32/12908_2.png) [@jfranci3](https://www.trainerroad.com/forum/u/jfranci3)\
**Post date:** [May 2, 2023, 11:52pm UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/39 "2023-05-02T23:52:21Z")

</div>

Doesn’t seem to be weeping at the label, put more label on it.

---

<div class="post-metadata">

**Author:** ![alex\_smallet](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/alex_smallet/32/60466_2.png) [@alex\_smallet](https://www.trainerroad.com/forum/u/alex_smallet)\
**Post date:** [May 3, 2023, 7:57am UTC](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418/40 "2023-05-03T07:57:41Z")

</div>

> [@AJS914](#):
>
> Sometimes there is a slick film of something on the inside of tires. I wonder if it prevents adhesion?

Yes, that could be the case. I think I should have wiped the inside with isopropyl alcohol. I will try this next time I install the tire.

> [@AJS914](#):
>
> I also read one time where team EF was pre-treating the inside of their tires with a coating of sealant (painting it on). Something like that might allow the sealant to dry nicely on the inside of the tire.

Yes, I’ve seen a video when someone did this with a Continental MTB tire, probably it was Race King, which sryke is talking about.

Found it:

[![](https://global.discourse-cdn.com/trainerroad/original/3X/f/a/fa8a0881b4ade5968b57320b7eaa6e7ae9bfd7e1.jpeg "Continental - Tubeless Ready - Preparing the tire") ](https://www.youtube.com/watch?v=1HfULR0PnZE&t=50s)

Yesterday it went from 73 psi to almost flat, today it went to 18 psi overnight. So maybe it will improve, but it takes waaaay too long. I think washing the inside with isopropyl alcohol before installation could be a good idea.

[Previous page](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418.md?page=1)

[Next page](https://www.trainerroad.com/forum/t/continental-gp-5000s-tr-leaking-air/83418.md?page=3)
