# Budget TT Disc Wheel

**URL:** <https://www.trainerroad.com/forum/t/budget-tt-disc-wheel/6598>\
**Category:** Equipment\
**Created:** [November 27, 2018, 2:09am UTC](https://www.trainerroad.com/forum/t/budget-tt-disc-wheel/6598 "2018-11-27T02:09:32Z")\
**Posts on this page:** 1\
**Showing post:** 49

<div class="post-metadata">

**Author:** ![Darkgerbil](https://sea2.discourse-cdn.com/trainerroad/forum/user_avatar/www.trainerroad.com/darkgerbil/32/24615_2.png) [@Darkgerbil](https://www.trainerroad.com/forum/u/Darkgerbil)\
**Post date:** [September 18, 2019, 2:01pm UTC](https://www.trainerroad.com/forum/t/budget-tt-disc-wheel/6598/49 "2019-09-18T14:01:58Z")

</div>

> [@TooManyDogs](#):
>
> How did you punch the holes for the cable ties? What type of tape did you use taping it down?

I used a 4mm brad-point drill bit, with a bit of wood under it. It’s quite soft plastic so it’d be hard to accidentally crack it.

I used decent quality electrical tape, any by 3M brand is good if you’re in Europe. The bond from the tape glue gets stronger with age.

---

_[View the full topic](https://www.trainerroad.com/forum/t/budget-tt-disc-wheel/6598)._