# Assioma Hack and Mud and Water - Report from The Mid South (a/k/a LandRun)

**URL:** <https://www.trainerroad.com/forum/t/assioma-hack-and-mud-and-water-report-from-the-mid-south-a-k-a-landrun/32439>\
**Category:** Equipment\
**Tags:** power-meter\
**Created:** [March 30, 2020, 3:50pm UTC](https://www.trainerroad.com/forum/t/assioma-hack-and-mud-and-water-report-from-the-mid-south-a-k-a-landrun/32439 "2020-03-30T15:50:41Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![logella](https://avatars.discourse-cdn.com/v4/letter/l/a698b9/32.png) [@logella](https://www.trainerroad.com/forum/u/logella)\
**Post date:** [April 2, 2020, 1:21am UTC](https://www.trainerroad.com/forum/t/assioma-hack-and-mud-and-water-report-from-the-mid-south-a-k-a-landrun/32439/6 "2020-04-02T01:21:43Z")

</div>

Correct, they are CXR’s. I posted my experience doing the hack on the other thread (Jan 8th) but this how I did it.

"Assioma spindle → CXR o-ring → CXR pedal body → Assioma end nut → CXR dust cap.

Everything is tightened to 9Nm and spins freely. I initially tried using the Assioma inside washer (too tight) as well as the Assioma dust cap (too tight)."

> [@A Wild idea for Favero Assioma pedals \[MTB SPD Hack\]](https://www.trainerroad.com/forum/t/a-wild-idea-for-favero-assioma-pedals/18627/150):
>
> I did the conversion with a set of CXR’s and had to issues with the pedal spinning. From inside to out here’s the way it worked for me: Assioma spindle → CXR o-ring → CXR pedal body → Assioma end nut → CXR dust cap. Everything is tightened to 9Nm and spins freely. I initially tried using the Assioma inside washer (too tight) as well as the Assioma dust cap (too tight).

---

_[View the full topic](https://www.trainerroad.com/forum/t/assioma-hack-and-mud-and-water-report-from-the-mid-south-a-k-a-landrun/32439)._
